Products

UNS N08800 Tubes
Home > Products > Tubes

We could produce UNS N08800 tubes,UNS NO8800 tubes,UNS N08800 tubings,UNS N08800 seamless tubes,UNS N08800 U Bend Tubes,UNS N08800 U-tube,UNS N08800 welded tubes,UNS NO8800 boiler tubes, UNS N08800 heat exchanger tubes,UNS N08800 Capillary tubes,UNS N08800 Thermocouple tubes,UNS N08800 Superheater tubes and reheater tubes,UNS NO8800 condenser tube,UNS N08800 finned tubes,UNS N08800 furnace tubes,UNS N08800 instrumentation tubes,UNS N08800 Evaporator tubes,UNS N08800 honed tubes, UNS N08800 coiled tubes,UNS N08800 Precision tubes,UNS N08800 High pressure tubes,UNS N08800 hydraulic tubes from china

The outer diameter of UNS N08800 tubes that we could do is from 0.4MM to 850MM,The thickness of UNS N08800 tubes that we could do is from 0.12MM to 100MM

As per surface finish of UNS N08800 seamless tubes and welded tubes, we could do 180G, 320G Satin / Hairline(Matt Finish, Brush, Dull Finish),PICKLING surface finish as per the requirement of the clients

We could produce UNS N08800 seamless tubes and weled tubes as per the standard of ASTM B729 and ASTM B464

As per heat treatment of UNS N08800 tubes, we could do solution treatment, ageing treatment as per the requirement of the clients

As per material of UNS N08800 tubes, our raw material has been melted by  EAF+VOD-ESR methods

UNS N08800 is a solid solution strengthened alloy of nickel, chromium and iron


The chemical composition of UNS NO8800 seamless tubes and weled tubes is as follows

Table 2 - Limiting Chemical Composition, %

Ni..................................................................................30.0-35.0

Cr............................................................................19.0-23.0

Fe.......................................................................................39.5min.

C................................................................................0.10max.

Mn.........................................................................1.50max.

Sr ................................................................................0.015max.

Si...................................................................................1.0max.

Cu...............................................................................0.75max.

Al............................................................................0.15-0.60

Ti..............................................................................0.15-0.60


The mechanical propery of UNS N08800 seamless tubes and weled tubes is as follows

Alloy

Form

Condition

Ultimate
 Tensile
 Strength,
 ksi (MPa)

Yield
 Strength
 at 0.2%
 offset,
 ksi (MPa)

Elongation
 in 2"
 or 4D, percent

UNS N08800

Annealed

85 (586)

40 (276)

43


We have following inspection equipment for our UNS NO8800 tubes:Ultrasonic Inspection Lines,Eddy Current Inspection Line,Hydraulic Test Equipment,OBLF Direct Reading Spectrometer,Metallurgical Microscope,Spectrophotometer,Electronic Balance,Impact Testing Machine,Impact Specimen Projector,Universal Testing Machine,Carbon-Sulfur Analyzer,INNOV Portable Alloy Analyzer,Rockwell Hardness Tester,Intergranular Corrosion Testing Machine,Endoscope

We have following production equipment for our UNS N08800 seamless tube and weled tubes:Peeling lines,Piercing lines,Cold drawing lines,Cold rolling lines,Straightening machine,Annealing furnace,Pickling pool

All our Minonic 90 Tubes will be wrapped in shrink foil, pipe ends protected with foil or plastic caps, reinforced frame construction made of wood, both front-sides closed, frame construction secured with steel strapping as per the requirement of the clients

Our UNS N08800 seamless tubes and weled tubes are widely used in many industries like,gas turbines, nuclear reactors and natural gas processing plants,valves, pumps and heat exchangers,steam turbines, pressure vessels,  heat exchangers, cooling towers, pipelines and so on


We could supply Third party inspection certificate for UNS N08800 seamless tubes and weled tubes  such as TUV, SGS, LR, MOODY, ITS, DNV,BV,Lloyd's Reg. of Shipping ,GL,API as per the requirement of the clients.

Please send us the size of UNS N08800 seamless tubes and weled tubes that you need, we are glad to quote the best price for our clients.

Except UNS N08800 tubes,we also could produce UNS N08800 flanges,UNS N08800 plates,UNS N08800 fastener,UNS N08800 bolts,UNS N08800 fittings,UNS N08800 pipes,UNS N08800 bars,UNS N08800 springs