Products

UNS N06617 Tubes
Home > Products > Tubes

We could produce UNS N06617 tubes,UNS NO6617 tubes,UNS N06617 tubings,UNS N06617 seamless tubes,UNS N06617 U Bend Tubes,UNS N06617 U-tube,UNS N06617 welded tubes,UNS NO6617 boiler tubes, UNS N06617 heat exchanger tubes,UNS N06617 Capillary tubes,UNS N06617 Thermocouple tubes,UNS N06617 Superheater tubes and reheater tubes,UNS NO6617 condenser tube,UNS N06617 finned tubes,UNS N06617 furnace tubes,UNS N06617 instrumentation tubes,UNS N06617 Evaporator tubes,UNS N06617 honed tubes, UNS N06617 coiled tubes,UNS N06617 Precision tubes,UNS N06617 High pressure tubes,UNS N06617 hydraulic tubes from china

The outer diameter of UNS N06617 tubes that we could do is from 0.4MM to 850MM,The thickness of UNS N06617 tubes that we could do is from 0.12MM to 100MM

As per surface finish of UNS N06617 seamless tubes and welded tubes, we could do 180G, 320G Satin / Hairline(Matt Finish, Brush, Dull Finish),PICKLING surface finish as per the requirement of the clients

We could produce UNS N06617 seamless tubes and weled tubes as per the standard of ASTM B729 and ASTM B464

As per heat treatment of UNS N06617 tubes, we could do solution treatment, ageing treatment as per the requirement of the clients

As per material of UNS N06617 tubes, our raw material has been melted by  EAF+VOD-ESR methods

UNS N06617 has excellent resistance to a wide range of corrosive environment, and it is readily formed and welded by conventional techniques.


The chemical composition of UNS NO6617 seamless tubes and weled tubes is as follows

Ni.........................................................................44.5min.

Cr....................................................................20.0-24.0

Co..........................................................................10.0-15.0

Mo.................................................................8.0-10.0

Al........................................................................0.8-1.5

C........................................................................0.05-0.15

Fe................................................................................3.0max.

Mn...................................................................1.0 max.

Si...........................................................................1.0max.

S ........................................................................0.015max.

Ti........................................................................0.6max.

Cu..........................................................................0.5max.

B ........................................................................0.006max.


The mechanical propery of UNS N06617 seamless tubes and weled tubes is as follows

Properties

Metric

Tensile strength

≥ 71KSI

Yield strength

≥ 40KSI

Elongation at break

≥ 25%

Hardness, Brinell

170


We have following inspection equipment for our UNS NO6617 tubes:Ultrasonic Inspection Lines,Eddy Current Inspection Line,Hydraulic Test Equipment,OBLF Direct Reading Spectrometer,Metallurgical Microscope,Spectrophotometer,Electronic Balance,Impact Testing Machine,Impact Specimen Projector,Universal Testing Machine,Carbon-Sulfur Analyzer,INNOV Portable Alloy Analyzer,Rockwell Hardness Tester,Intergranular Corrosion Testing Machine,Endoscope

We have following production equipment for our UNS N06617 seamless tube and weled tubes:Peeling lines,Piercing lines,Cold drawing lines,Cold rolling lines,Straightening machine,Annealing furnace,Pickling pool

All our Minonic 90 Tubes will be wrapped in shrink foil, pipe ends protected with foil or plastic caps, reinforced frame construction made of wood, both front-sides closed, frame construction secured with steel strapping as per the requirement of the clients

Our UNS N06617 seamless tubes and weled tubes are widely used in many industries like,heat exchangers,air receivers,pressure vessels,Stripper columns, separators, splitter, columns, hydro treaters, hydro crackers, desalters,shipping building and Aviation,drilling stations, pipelines and refineries,processing units,mechanical equipment, crystalizer equipment,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors, power generators and nitrogen generators and so on,


We could supply Third party inspection certificate for UNS N06617 seamless tubes and weled tubes  such as TUV, SGS, LR, MOODY, ITS, DNV,BV,Lloyd's Reg. of Shipping ,GL,API as per the requirement of the clients.

Please send us the size of UNS N06617 seamless tubes and weled tubes that you need, we are glad to quote the best price for our clients.

Except UNS N06617 tubes,we also could produce UNS N06617 flanges,UNS N06617 plates,UNS N06617 fastener,UNS N06617 bolts,UNS N06617 fittings,UNS N06617 pipes,UNS N06617 bars,UNS N06617 springs