Products

UNS N04405 Tubes
Home > Products > Tubes

We could produce UNS N04405 tubes,UNS NO4405 tubes,UNS N04405 tubings,UNS N04405 seamless tubes,UNS N04405 U Bend Tubes,UNS N04405 U-tube,UNS N04405 welded tubes,UNS NO4405 boiler tubes, UNS N04405 heat exchanger tubes,UNS N04405 Capillary tubes,UNS N04405 Thermocouple tubes,UNS N04405 Superheater tubes and reheater tubes,UNS NO4405 condenser tube,UNS N04405 finned tubes,UNS N04405 furnace tubes,UNS N04405 instrumentation tubes,UNS N04405 Evaporator tubes,UNS N04405 honed tubes, UNS N04405 coiled tubes,UNS N04405 Precision tubes,UNS N04405 High pressure tubes,UNS N04405 hydraulic tubes from china

The outer diameter of UNS N04405 tubes that we could do is from 0.4MM to 850MM,The thickness of UNS N04405 tubes that we could do is from 0.12MM to 100MM

As per surface finish of UNS N04405 seamless tubes and welded tubes, we could do 180G, 320G Satin / Hairline(Matt Finish, Brush, Dull Finish),PICKLING surface finish as per the requirement of the clients

We could produce UNS N04405 seamless tubes and weled tubes as per the standard of ASTM B729 and ASTM B464

As per heat treatment of UNS N04405 tubes, we could do solution treatment, ageing treatment as per the requirement of the clients

As per material of UNS N04405 tubes, our raw material has been melted by  EAF+VOD-ESR methods

UNS N04405 is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.


The chemical composition of UNS NO4405 seamless tubes and weled tubes is as follows

Table 1 - Limiting Chemical Composition, %,

of UNS N04405

Ni (plus Cot).....................................................63.0 min.

C.........................................................................0.3max.

Mn ...................................................................2.0max.

Fe................................................................................2.5max.

S.......................................................................0.025-0.060

Si ...........................................................................0.5max.

Cu......................................................................28.0 -34.0


The mechanical propery of UNS N04405 seamless tubes and weled tubes is as follows

Material

Tensile  Strength Ksi

Yield  Strength (0.2% Offset) Ksi

Elongation  (%)

Hardness  Rockwell B

UNS  N04405

70-85

25-40

50-35

60-76


We have following inspection equipment for our UNS NO4405 tubes:Ultrasonic Inspection Lines,Eddy Current Inspection Line,Hydraulic Test Equipment,OBLF Direct Reading Spectrometer,Metallurgical Microscope,Spectrophotometer,Electronic Balance,Impact Testing Machine,Impact Specimen Projector,Universal Testing Machine,Carbon-Sulfur Analyzer,INNOV Portable Alloy Analyzer,Rockwell Hardness Tester,Intergranular Corrosion Testing Machine,Endoscope

We have following production equipment for our UNS N04405 seamless tube and weled tubes:Peeling lines,Piercing lines,Cold drawing lines,Cold rolling lines,Straightening machine,Annealing furnace,Pickling pool

All our Minonic 90 Tubes will be wrapped in shrink foil, pipe ends protected with foil or plastic caps, reinforced frame construction made of wood, both front-sides closed, frame construction secured with steel strapping as per the requirement of the clients

Our UNS N04405 seamless tubes and weled tubes are widely used in many industries like,ANCILLARY INDUSTRIES,Alternative Fuel Systems,Research & Design Projects,Geothermal Power Plants,Wind Farm Maintenance ,Solar (Photovoltaics) Power Equipment ,Hydro-Electric Power Plant,Coal-fueled, Oil-fueled or Nuclear Power Plant Maintenance ,Natural Gas Storage & Plant Maintenance Boiler Systems ,Turbine Manufacturers ,Transmission, Distribution & Storage Equipment Manufacturers,Motors & Generators and so on


We could supply Third party inspection certificate for UNS N04405 seamless tubes and weled tubes  such as TUV, SGS, LR, MOODY, ITS, DNV,BV,Lloyd's Reg. of Shipping ,GL,API as per the requirement of the clients.

Please send us the size of UNS N04405 seamless tubes and weled tubes that you need, we are glad to quote the best price for our clients.

Except UNS N04405 tubes,we also could produce UNS N04405 flanges,UNS N04405 plates,UNS N04405 fastener,UNS N04405 bolts,UNS N04405 fittings,UNS N04405 pipes,UNS N04405 bars,UNS N04405 springs