We could produce Inconel 783 tubes,Inconel783 tubes,Inconel 783 tubings,Inconel 783 seamless tubes,Inconel 783 U Bend Tubes,Inconel 783 U-tube,Inconel 783 welded tubes,Inconel783 boiler tubes, Inconel 783 heat exchanger tubes,Inconel 783 Capillary tubes,Inconel 783 Thermocouple tubes,Inconel 783 Superheater tubes and reheater tubes,Inconel783 condenser tube,Inconel 783 finned tubes,Inconel 783 furnace tubes,Inconel 783 instrumentation tubes,Inconel 783 Evaporator tubes,Inconel 783 honed tubes, Inconel 783 coiled tubes,Inconel 783 Precision tubes,Inconel 783 High pressure tubes,Inconel 783 hydraulic tubes from china

The outer diameter of Inconel 783 tubes that we could do is from 0.4MM to 850MM,The thickness of Inconel 783 tubes that we could do is from 0.12MM to 100MM

As per surface finish of Inconel 783 seamless tubes and welded tubes, we could do 180G, 320G Satin / Hairline(Matt Finish, Brush, Dull Finish),PICKLING surface finish as per the requirement of the clients

We could produce Inconel 783 seamless tubes and weled tubes as per the standard of ASTM B729 and ASTM B464

As per heat treatment of Inconel 783 tubes, we could do solution treatment, ageing treatment as per the requirement of the clients

As per material of Inconel 783 tubes, our raw material has been melted by  EAF+VOD-ESR methods

Inconel 783 is a nickel-cobalt-iron alloy  

The chemical composition of Inconel783 seamless tubes and weled tubes is as follows

Table 1 - Limiting Chemical Composition*, %

Chromium......................................................................2.5-3.5

Nickel.........................................................................26.0-30.0

Iron..............................................................................24.0-27.0

Niobium...........................................................................2.5-3.5

Aluminum........................................................................5.0-6.0

Cobalt........................................................................Remainder

Boron.......................................................................0.003-0.012

Carbon........................................................................0.03max.

Manganese.................................................................0.50 max.

Silicon.........................................................................0.50max.

Phosphorus..............................................................0.015max.

Sulfur .........................................................................0.005max

Titanium...........................................................................0.1-0.4

Copper.........................................................................0.50max

The mechanical propery of Inconel 783 seamless tubes and weled tubes is as follows

Properties	Metric
Tensile  strength	173130 PSI
Yield  strength	112955 PSI
Poisson’s  ratio	0.31
Elastic  modulus	177.3 GPA
Elongation  at break	24%

We have following inspection equipment for our Inconel783 tubes:Ultrasonic Inspection Lines,Eddy Current Inspection Line,Hydraulic Test Equipment,OBLF Direct Reading Spectrometer,Metallurgical Microscope,Spectrophotometer,Electronic Balance,Impact Testing Machine,Impact Specimen Projector,Universal Testing Machine,Carbon-Sulfur Analyzer,INNOV Portable Alloy Analyzer,Rockwell Hardness Tester,Intergranular Corrosion Testing Machine,Endoscope

We have following production equipment for our Inconel 783 seamless tube and weled tubes:Peeling lines,Piercing lines,Cold drawing lines,Cold rolling lines,Straightening machine,Annealing furnace,Pickling pool

All our Minonic 90 Tubes will be wrapped in shrink foil, pipe ends protected with foil or plastic caps, reinforced frame construction made of wood, both front-sides closed, frame construction secured with steel strapping as per the requirement of the clients

Our Inconel 783 seamless tubes and weled tubes are widely used in many industries like,Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on

We could supply Third party inspection certificate for Inconel 783 seamless tubes and weled tubes  such as TUV, SGS, LR, MOODY, ITS, DNV,BV,Lloyd's Reg. of Shipping ,GL,API as per the requirement of the clients.

Please send us the size of Inconel 783 seamless tubes and weled tubes that you need, we are glad to quote the best price for our clients.

Except Inconel 783 tubes,we also could produce Inconel 783 flanges,Inconel 783 plates,Inconel 783 fastener,Inconel 783 bolts,Inconel 783 fittings,Inconel 783 pipes,Inconel 783 bars,Inconel 783 springs