Products

1.4876 Tubes
Home > Products > Tubes

We could produce 1.4876 tubes,EN 1.4876 tubes,1.4876 tubings,1.4876 seamless tubes,1.4876 U Bend Tubes,1.4876 U-tube,1.4876 welded tubes,EN 1.4876 boiler tubes, 1.4876 heat exchanger tubes,1.4876 Capillary tubes,1.4876 Thermocouple tubes,1.4876 Superheater tubes and reheater tubes,EN 1.4876 condenser tube,1.4876 finned tubes,1.4876 furnace tubes,1.4876 instrumentation tubes,1.4876 Evaporator tubes,1.4876 honed tubes, 1.4876 coiled tubes,1.4876 Precision tubes,1.4876 High pressure tubes,1.4876 hydraulic tubes from china

The outer diameter of 1.4876 tubes that we could do is from 0.4MM to 850MM,The thickness of 1.4876 tubes that we could do is from 0.12MM to 100MM

As per surface finish of 1.4876 seamless tubes and welded tubes, we could do 180G, 320G Satin / Hairline(Matt Finish, Brush, Dull Finish),PICKLING surface finish as per the requirement of the clients

We could produce 1.4876 seamless tubes and weled tubes as per the standard of ASTM B729 and ASTM B464

As per heat treatment of 1.4876 tubes, we could do solution treatment, ageing treatment as per the requirement of the clients

As per material of 1.4876 tubes, our raw material has been melted by  EAF+VOD-ESR methods

1.4876 is a solid solution strengthened alloy of nickel, chromium and iron


The chemical composition of EN 1.4876 seamless tubes and weled tubes is as follows

Table 2 - Limiting Chemical Composition, %

Ni..................................................................................30.0-35.0

Cr............................................................................19.0-23.0

Fe.......................................................................................39.5min.

C................................................................................0.10max.

Mn.........................................................................1.50max.

Sr ................................................................................0.015max.

Si...................................................................................1.0max.

Cu...............................................................................0.75max.

Al............................................................................0.15-0.60

Ti..............................................................................0.15-0.60


The mechanical propery of 1.4876 seamless tubes and weled tubes is as follows

Alloy

Form

Condition

Ultimate
 Tensile
 Strength,
 ksi (MPa)

Yield
 Strength
 at 0.2%
 offset,
 ksi (MPa)

Elongation
 in 2"
 or 4D, percent

1.4876

Annealed

85 (586)

40 (276)

43


We have following inspection equipment for our EN 1.4876 tubes:Ultrasonic Inspection Lines,Eddy Current Inspection Line,Hydraulic Test Equipment,OBLF Direct Reading Spectrometer,Metallurgical Microscope,Spectrophotometer,Electronic Balance,Impact Testing Machine,Impact Specimen Projector,Universal Testing Machine,Carbon-Sulfur Analyzer,INNOV Portable Alloy Analyzer,Rockwell Hardness Tester,Intergranular Corrosion Testing Machine,Endoscope

We have following production equipment for our 1.4876 seamless tube and weled tubes:Peeling lines,Piercing lines,Cold drawing lines,Cold rolling lines,Straightening machine,Annealing furnace,Pickling pool

All our Minonic 90 Tubes will be wrapped in shrink foil, pipe ends protected with foil or plastic caps, reinforced frame construction made of wood, both front-sides closed, frame construction secured with steel strapping as per the requirement of the clients

Our 1.4876 seamless tubes and weled tubes are widely used in many industries like,ANCILLARY INDUSTRIES,Alternative Fuel Systems,Research & Design Projects,Geothermal Power Plants,Wind Farm Maintenance ,Solar (Photovoltaics) Power Equipment ,Hydro-Electric Power Plant,Coal-fueled, Oil-fueled or Nuclear Power Plant Maintenance ,Natural Gas Storage & Plant Maintenance Boiler Systems ,Turbine Manufacturers ,Transmission, Distribution & Storage Equipment Manufacturers,Motors & Generators and so on


We could supply Third party inspection certificate for 1.4876 seamless tubes and weled tubes  such as TUV, SGS, LR, MOODY, ITS, DNV,BV,Lloyd's Reg. of Shipping ,GL,API as per the requirement of the clients.

Please send us the size of 1.4876 seamless tubes and weled tubes that you need, we are glad to quote the best price for our clients.

Except 1.4876 tubes,we also could produce 1.4876 flanges,1.4876 plates,1.4876 fastener,1.4876 bolts,1.4876 fittings,1.4876 pipes,1.4876 bars,1.4876 springs