Products

UNS S46500 Springs
Home > Products > Springs

We could produce UNS S46500 springs,S46500 springs,S46500 Compression Springs,UNS S46500 Extension Springs,UNS S46500 Torsion Springs,S46500 tension spring, UNS S46500 disc spring, UNS S46500 wave spring,S46500 Spiral Springs,UNS S46500 Automotive Springs,UNS S46500 Elevator Springs,UNS S46500 coil springs,UNS S46500 Conical Springs,UNS S46500 Tapered Springs,UNS S46500 Barrel Springs,S46500 die springs,S46500 Constant Force Springs,S46500 Power Springs,S46500 Garter Springs,UNS S46500 retaining Springs,UNS S46500 Volute Springs,UNS S46500 flat springs,UNS S46500 Volute Springs,UNS S46500 battery springs,UNS S46500 Spring Clips,UNS S46500 Battery Contacts from china

The diameter of UNS S46500 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS S46500 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS S46500 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS S46500 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS S46500 is a martensitic, age hardenable alloy.


The chemical composition of S46500 springs is as follows

Chemical Composition Limits

Weight%

C

P

Si

Ni

Ti

Mn

S

Cr

Mo

Fe

UNS S46500

0.02 max

0.015 max

0.25 max

10.75-11.25

1.5-1.8

0.25 max

0.010 max

11.0 -12.5

0.75-1.25

Bal


The mechanical property of UNS S46500 spring is as follows

Mechanical Properties

MinimumTensile Properties

Condition

Specimen Orientation

Tensile Strength MPA

Yield Strength at 0.2% Offset MPA

Elongation in 2 Inches or 4D %

Reduction of Area %

H950

Longitudinal

1644

1507

10

45

Transverse

1644

1507

8

35

H1000

Longitudinal

1507

1307

10

50

Transverse

1507

1307

10

40


We could do solution treatment and ageing treatment for UNS S46500 springs as per the requirement of the clients.

We could supply inspection certificate of UNS S46500 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS S46500 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our S46500 springs are widely used in Water Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on


Please send us the drawing of UNS S46500 springs that you need, we are glad to quote the best price for your side.

Except UNS S46500 Springs,we also could produce UNS S46500 flanges,UNS S46500 plates,UNS S46500 fastener,UNS S46500 bolts,UNS S46500 fittings,UNS S46500 pipes,UNS S46500 tubes,UNS S46500 bars