Products

UNS S45500 Springs
Home > Products > Springs

We could produce UNS S45500 springs,S45500 springs,S45500 Compression Springs,UNS S45500 Extension Springs,UNS S45500 Torsion Springs,S45500 tension spring, UNS S45500 disc spring, UNS S45500 wave spring,S45500 Spiral Springs,UNS S45500 Automotive Springs,UNS S45500 Elevator Springs,UNS S45500 coil springs,UNS S45500 Conical Springs,UNS S45500 Tapered Springs,UNS S45500 Barrel Springs,S45500 die springs,S45500 Constant Force Springs,S45500 Power Springs,S45500 Garter Springs,UNS S45500 retaining Springs,UNS S45500 Volute Springs,UNS S45500 flat springs,UNS S45500 Volute Springs,UNS S45500 battery springs,UNS S45500 Spring Clips,UNS S45500 Battery Contacts from china

The diameter of UNS S45500 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS S45500 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS S45500 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS S45500 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS S45500 offers high strength combined with good corrosion resistance. Easily pliable in the annealed condition,


The chemical composition of S45500 springs is as follows

C

0.05 max

Cr

11 - 12.5

Cu

1.5 - 2.5

Fe

Balance

Mn

0.5 max

Mo

0.5 max

Nil

7.5 - 9.5

Nb

0.1 - 0.5

P

0.04 max

Si

0.5 max

S

0.03 max

Ti

0.8 - 1.4


The mechanical property of UNS S45500 spring is as follows

Properties

Metric

Imperial

Tensile strength (@ diameter 102 mm/4 in)

965 MPa

140000 psi

Yield strength (@ strain 0.200%, diameter 25.4 mm/1 in)

795 MPa

115000 psi

Charpy Impact

95 J

70.1 ft-lb

Elongation at break (@ diameter 102 mm/4 in, in 50 mm)

12%

12%

Hardness, Brinell (@ diameter 25.4 mm/ 1 in, converted  from Rockwell C hardness)

297

297

Hardness, Knoop (@ diameter 25.4 mm/ 1 in, converted  from Rockwell C hardness)

318

318

Hardness, Vickers (diameter 25.4 mm/ 1 in, converted  from Rockwell C hardness)

308


We could do solution treatment and ageing treatment for UNS S45500 springs as per the requirement of the clients.

We could supply inspection certificate of UNS S45500 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS S45500 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our S45500 springs are widely used in Petrochemical,Capital equipment,Energy,Shipping & Offshore industry,Mining industry,Cement industry,Paper industry,Metalworking industry and so on


Please send us the drawing of UNS S45500 springs that you need, we are glad to quote the best price for your side.

Except UNS S45500 Springs,we also could produce UNS S45500 flanges,UNS S45500 plates,UNS S45500 fastener,UNS S45500 bolts,UNS S45500 fittings,UNS S45500 pipes,UNS S45500 tubes,UNS S45500 bars