Products

UNS S35045 Springs
Home > Products > Springs

We could produce UNS S35045 springs,S35045 springs,S35045 Compression Springs,UNS S35045 Extension Springs,UNS S35045 Torsion Springs,S35045 tension spring, UNS S35045 disc spring, UNS S35045 wave spring,S35045 Spiral Springs,UNS S35045 Automotive Springs,UNS S35045 Elevator Springs,UNS S35045 coil springs,UNS S35045 Conical Springs,UNS S35045 Tapered Springs,UNS S35045 Barrel Springs,S35045 die springs,S35045 Constant Force Springs,S35045 Power Springs,S35045 Garter Springs,UNS S35045 retaining Springs,UNS S35045 Volute Springs,UNS S35045 flat springs,UNS S35045 Volute Springs,UNS S35045 battery springs,UNS S35045 Spring Clips,UNS S35045 Battery Contacts from china

The diameter of UNS S35045 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS S35045 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS S35045 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS S35045 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS S35045 Is an iron-nickelchromium alloy


The chemical composition of S35045 springs is as follows

Table 1 - Limiting Chemical Composition, %

Nickel..........................................................................32.0-37.0

Chromium....................................................................25.0-29.0

Iron...............................................................................Balance*

Carbon........................................................................0.06-0.10

Aluminum....................................................................0.15-0.60

Titanium.......................................................................0.15-0.60

Copper........................................................................0.75max.

Sulfur........................................................................0.015max.

Manganese...................................................................1.5 max.

Silicon...........................................................................1.0max.


The mechanical property of UNS S35045 spring is as follows

Properties

Metric

Imperial

Tensile strength(sheet, cold rolled and solution annealed)

552-621 MPa

80.1-90.1 ksi

Yield strength(rod, hot finished and solution annealed)

207-255 MPa

30-37 ksi

Elongation at Break( sheet, cold rolled and solution  annealed)

40-45%

40-45%

Poissons Ratio

0.32

0.32


We could do solution treatment and ageing treatment for UNS S35045 springs as per the requirement of the clients.

We could supply inspection certificate of UNS S35045 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS S35045 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our S35045 springs are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


Please send us the drawing of UNS S35045 springs that you need, we are glad to quote the best price for your side.

Except UNS S35045 Springs,we also could produce UNS S35045 flanges,UNS S35045 plates,UNS S35045 fastener,UNS S35045 bolts,UNS S35045 fittings,UNS S35045 pipes,UNS S35045 tubes,UNS S35045 bars