Products

UNS S32100 Springs
Home > Products > Springs

We could produce UNS S32100 springs,S32100 springs,S32100 Compression Springs,UNS S32100 Extension Springs,UNS S32100 Torsion Springs,S32100 tension spring, UNS S32100 disc spring, UNS S32100 wave spring,S32100 Spiral Springs,UNS S32100 Automotive Springs,UNS S32100 Elevator Springs,UNS S32100 coil springs,UNS S32100 Conical Springs,UNS S32100 Tapered Springs,UNS S32100 Barrel Springs,S32100 die springs,S32100 Constant Force Springs,S32100 Power Springs,S32100 Garter Springs,UNS S32100 retaining Springs,UNS S32100 Volute Springs,UNS S32100 flat springs,UNS S32100 Volute Springs,UNS S32100 battery springs,UNS S32100 Spring Clips,UNS S32100 Battery Contacts from china

The diameter of UNS S32100 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS S32100 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS S32100 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS S32100 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS S32100 is suitable for wet-corrosive service but also has good mechanical strength at high temperatures.


The chemical composition of S32100 springs is as follows

C

0.08 max

Cr

17 - 19

Fe

Balance

Mn

2 max

Ni

9 - 12

P

0.045 max

Si

1 max

S

0.03 max

Ti

Min:5 x C


The mechanical property of UNS S32100 spring is as follows

Mechanical Properties
Average Elevated Temperature TensileProperties


Temperature,  °F

Ultimate Tensile Strength, MPA

.2% Yield Strength, MPA

68

575

260


We could do solution treatment and ageing treatment for UNS S32100 springs as per the requirement of the clients.

We could supply inspection certificate of UNS S32100 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS S32100 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our S32100 springs are widely used in Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on


Please send us the drawing of UNS S32100 springs that you need, we are glad to quote the best price for your side.

Except UNS S32100 Springs,we also could produce UNS S32100 flanges,UNS S32100 plates,UNS S32100 fastener,UNS S32100 bolts,UNS S32100 fittings,UNS S32100 pipes,UNS S32100 tubes,UNS S32100 bars