Products

UNS S31008 Springs
Home > Products > Springs

We could produce UNS S31008 springs,S31008 springs,S31008 Compression Springs,UNS S31008 Extension Springs,UNS S31008 Torsion Springs,S31008 tension spring, UNS S31008 disc spring, UNS S31008 wave spring,S31008 Spiral Springs,UNS S31008 Automotive Springs,UNS S31008 Elevator Springs,UNS S31008 coil springs,UNS S31008 Conical Springs,UNS S31008 Tapered Springs,UNS S31008 Barrel Springs,S31008 die springs,S31008 Constant Force Springs,S31008 Power Springs,S31008 Garter Springs,UNS S31008 retaining Springs,UNS S31008 Volute Springs,UNS S31008 flat springs,UNS S31008 Volute Springs,UNS S31008 battery springs,UNS S31008 Spring Clips,UNS S31008 Battery Contacts from china

The diameter of UNS S31008 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS S31008 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS S31008 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS S31008 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS S31008 is used when the application environment involves moist corrodents and in dry environments. The lower carbon content of 310S does reduce its high temperature strength compared to 310.


The chemical composition of S31008 springs is as follows

Chrominium

Nickel

Carbon

Silcon

Manganese

24.0-26.0

19.2-22.0

.08 Max

1.50  Max

2.00  Max

Phosphorous

Sulfur

Molybdenum

Copper

Iron

.045  Max

.03  Max

.75  Max

.50  Max

Balance


The mechanical property of UNS S31008 spring is as follows


Temperature,  °F

Ultimate Tensile Strength, MPA

.2% Yield Strength, MPA

Elongation Percent

70

548

240

52


We could do solution treatment and ageing treatment for UNS S31008 springs as per the requirement of the clients.

We could supply inspection certificate of UNS S31008 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS S31008 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our S31008 springs are widely used in Drilling & Boring Equipment ,Wellhead Manufacture,Repair or Servicing Companies,Pipeline Construction & Repair.Pumping & Refining Equipment,Oil Extraction Systems,Oil Rig Construction,Repair & Maintenance Subcontractors ,Upstream, Midstream or Downstream Service Providers .Isolation Valves & Choke Equipment Manufacturers,Submersible Watercraft and so on


Please send us the drawing of UNS S31008 springs that you need, we are glad to quote the best price for your side.

Except UNS S31008 Springs,we also could produce UNS S31008 flanges,UNS S31008 plates,UNS S31008 fastener,UNS S31008 bolts,UNS S31008 fittings,UNS S31008 pipes,UNS S31008 tubes,UNS S31008 bars