Products

UNS S30100 Springs
Home > Products > Springs

We could produce UNS S30100 springs,S30100 springs,S30100 Compression Springs,UNS S30100 Extension Springs,UNS S30100 Torsion Springs,S30100 tension spring, UNS S30100 disc spring, UNS S30100 wave spring,S30100 Spiral Springs,UNS S30100 Automotive Springs,UNS S30100 Elevator Springs,UNS S30100 coil springs,UNS S30100 Conical Springs,UNS S30100 Tapered Springs,UNS S30100 Barrel Springs,S30100 die springs,S30100 Constant Force Springs,S30100 Power Springs,S30100 Garter Springs,UNS S30100 retaining Springs,UNS S30100 Volute Springs,UNS S30100 flat springs,UNS S30100 Volute Springs,UNS S30100 battery springs,UNS S30100 Spring Clips,UNS S30100 Battery Contacts from china

The diameter of UNS S30100 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS S30100 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS S30100 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS S30100 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS S30100 is a commonly available austenitic stainless with good corrosion resistance and elevated carbon to allow for cold working to a variety of tempers.


The chemical composition of S30100 springs is as follows

Carbon

0.15 max

Chromium

16 - 18

Iron

Balance

Manganese

2 max

Nickel

6 - 8

Phosphorus

0.045 max

Silicon

1 max

Sulphur

0.03 max


The mechanical property of UNS S30100 spring is as follows

Table 2. Mechanicalproperties of UNS S30100 grade stainless steel

AISI 301

Tensile Strength (PSI)  min.

Yield Strength 0.2%  Proof (PSI) min.

Elongation (% in  50mm) (thick.>0.76mm) min.

Bend Test  (thickness > 1.27mm)

Bend Angle (°)

Factor

Annealed

74675

29725

40

-

-


We could do solution treatment and ageing treatment for UNS S30100 springs as per the requirement of the clients.

We could supply inspection certificate of UNS S30100 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS S30100 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our S30100 springs are widely used in Refineries,Gas Processing,Off-Shore Oil Drilling Companies,Petrochemicals,Hydro-Carbon,Fertilizers,Power Generation,Specialty Chemicals,Pharmaceuticals

Drugs,Steel,Cement,Pesticides,General Piping,Construction,Engineering and so on


Please send us the drawing of UNS S30100 springs that you need, we are glad to quote the best price for your side.

Except UNS S30100 Springs,we also could produce UNS S30100 flanges,UNS S30100 plates,UNS S30100 fastener,UNS S30100 bolts,UNS S30100 fittings,UNS S30100 pipes,UNS S30100 tubes,UNS S30100 bars