Products

UNS N30605 Springs
Home > Products > Springs

We could produce UNS N30605 springs,N30605 springs,N30605 Compression Springs,UNS N30605 Extension Springs,UNS N30605 Torsion Springs,N30605 tension spring, UNS N30605 disc spring, UNS N30605 wave spring,N30605 Spiral Springs,UNS N30605 Automotive Springs,UNS N30605 Elevator Springs,UNS N30605 coil springs,UNS N30605 Conical Springs,UNS N30605 Tapered Springs,UNS N30605 Barrel Springs,N30605 die springs,N30605 Constant Force Springs,N30605 Power Springs,N30605 Garter Springs,UNS N30605 retaining Springs,UNS N30605 Volute Springs,UNS N30605 flat springs,UNS N30605 Volute Springs,UNS N30605 battery springs,UNS N30605 Spring Clips,UNS N30605 Battery Contacts from china

The diameter of UNS N30605 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N30605 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N30605 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N30605 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N30605 is a wrought, cobalt-base alloy that resists oxidation and carburization to 1900°F (1038°C).


The chemical composition of N30605 springs is as follows

Table 1 - Limiting Chemical Composition, wt%

Carbon........................................................................0.05-0.15

Manganese.....................................................................1.0-2.0

Silicon.........................................................................0.40max.

Chromium...................................................................19.0-21.0

Nickel...........................................................................9.0-11.0

Tungsten....................................................................14.0-16.0

Phosphorus..............................................................0.040max.

Sulfur........................................................................0.030max.

Iron...............................................................................3.0max.

Cobalt.........................................................................Balance*


The mechanical property of UNS N30605 spring is as follows

Material

Temperature  °F

Yield  Strength 0.2%

Tensile  Strength

Elongation  (%)

Hardness  HB

UNS R30605

RT

310 Mpa

862 Mpa

30

277 max


We could do solution treatment and ageing treatment for UNS N30605 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N30605 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N30605 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our N30605 springs are widely used in Water Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on


Please send us the drawing of UNS N30605 springs that you need, we are glad to quote the best price for your side.

Except UNS N30605 Springs,we also could produce UNS N30605 flanges,UNS N30605 plates,UNS N30605 fastener,UNS N30605 bolts,UNS N30605 fittings,UNS N30605 pipes,UNS N30605 tubes,UNS N30605 bars