Products

UNS N19907 Springs
Home > Products > Springs

We could produce UNS N19907 springs,N19907 springs,N19907 Compression Springs,UNS N19907 Extension Springs,UNS N19907 Torsion Springs,N19907 tension spring, UNS N19907 disc spring, UNS N19907 wave spring,N19907 Spiral Springs,UNS N19907 Automotive Springs,UNS N19907 Elevator Springs,UNS N19907 coil springs,UNS N19907 Conical Springs,UNS N19907 Tapered Springs,UNS N19907 Barrel Springs,N19907 die springs,N19907 Constant Force Springs,N19907 Power Springs,N19907 Garter Springs,UNS N19907 retaining Springs,UNS N19907 Volute Springs,UNS N19907 flat springs,UNS N19907 Volute Springs,UNS N19907 battery springs,UNS N19907 Spring Clips,UNS N19907 Battery Contacts from china

The diameter of UNS N19907 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N19907 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N19907 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N19907 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N19907 can be strengthened by work hardening, precipitation hardening, and solid-solution hardening.


The chemical composition of N19907 springs is as follows

ChemicalComposition

The following tableshows the chemical composition of UNS N19907

Elements

Content (%)

Iron

42

Nickel

38

Cobalt

13

Niobium

4.7

Titanium

1.5

Silicon

0.15

Aluminum

0.03


The mechanical property of UNS N19907 spring is as follows

Properties

Metric

Imperial

Tensile strength (precipitation hardened, value at room  temperature)

1350 MPa

196000 psi

Yield strength (@ strain 0.200%, precipitation  hardened, value at room temperature)

1100 MPa

160000 psi

Poisson’s ratio

0.36

0.36

Elongation at break (precipitation hardened)

10%

10%

Reduction of area

36

36


We could do solution treatment and ageing treatment for UNS N19907 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N19907 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N19907 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our N19907 springs are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on


Please send us the drawing of UNS N19907 springs that you need, we are glad to quote the best price for your side.

Except UNS N19907 Springs,we also could produce UNS N19907 flanges,UNS N19907 plates,UNS N19907 fastener,UNS N19907 bolts,UNS N19907 fittings,UNS N19907 pipes,UNS N19907 tubes,UNS N19907 bars