Products

UNS N10362 Springs
Home > Products > Springs

We could produce UNS N10362 springs,N10362 springs,N10362 Compression Springs,UNS N10362 Extension Springs,UNS N10362 Torsion Springs,N10362 tension spring, UNS N10362 disc spring, UNS N10362 wave spring,N10362 Spiral Springs,UNS N10362 Automotive Springs,UNS N10362 Elevator Springs,UNS N10362 coil springs,UNS N10362 Conical Springs,UNS N10362 Tapered Springs,UNS N10362 Barrel Springs,N10362 die springs,N10362 Constant Force Springs,N10362 Power Springs,N10362 Garter Springs,UNS N10362 retaining Springs,UNS N10362 Volute Springs,UNS N10362 flat springs,UNS N10362 Volute Springs,UNS N10362 battery springs,UNS N10362 Spring Clips,UNS N10362 Battery Contacts from china

The diameter of UNS N10362 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N10362 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N10362 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N10362 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N10362 has a very good warm and cold forming characteristics.


The chemical composition of N10362 springs is as follows

Ni

Cr

Mo

C

AL

Mn

Balance

15

22

0.01 Max

0.5MAX

0.25

Si

Fe

0.18

. 1.25MAX


The mechanical property of UNS N10362 spring is as follows

Mechanical Properties
Representative Tensile and Impact Properties

Temp. °F (°C)

Ult. Tensile Strength, psi

.2% Yield Strength, psi

Elongation in 2”, percent

70 (21)

105125

44950

40


We could do solution treatment and ageing treatment for UNS N10362 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N10362 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N10362 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our N10362 springs are widely used in Flue gas scrubbers,Chlorination systems,Acid production and pickling systems,Outlet ducting and stack liners for power plants,Sulfur dioxide scrubbers,Pulp and paper bleach plants,Weld overlay of less corrosion resistant metals,Pesticide and other agrichemical production,Tubular heat exchangers

Plate heat exchangers,Nuclear fuel reprocessing,incineration scrubber systems and so on


Please send us the drawing of UNS N10362 springs that you need, we are glad to quote the best price for your side.

Except UNS N10362 Springs,we also could produce UNS N10362 flanges,UNS N10362 plates,UNS N10362 fastener,UNS N10362 bolts,UNS N10362 fittings,UNS N10362 pipes,UNS N10362 tubes,UNS N10362 bars