Products

UNS N08811 Springs
Home > Products > Springs

We could produce UNS N08811 springs,UNS NO8811 springs,UNS NO8811 Compression Springs,UNS N08811 Extension Springs,UNS N08811 Torsion Springs,UNS NO8811 tension spring, UNS N08811 disc spring, UNS N08811 wave spring,UNS NO8811 Spiral Springs,UNS N08811 Automotive Springs,UNS N08811 Elevator Springs,UNS N08811 coil springs,UNS N08811 Conical Springs,UNS N08811 Tapered Springs,UNS N08811 Barrel Springs,UNS NO8811 die springs,UNS NO8811 Constant Force Springs,UNS NO8811 Power Springs,UNS NO8811 Garter Springs,UNS N08811 retaining Springs,UNS N08811 Volute Springs,UNS N08811 flat springs,UNS N08811 Volute Springs,UNS N08811 battery springs,UNS N08811 Spring Clips,UNS N08811 Battery Contacts from china

The diameter of UNS N08811 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N08811 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N08811 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N08811 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N08811 is an austenitic high-strength solid-solution Ni-Fe-Cr alloy with controlled levels of carbon, aluminium, titanium, silicon and manganese and increased content of (Al+Ti).


The chemical composition of UNS NO8811 springs is as follows

C

Si

Mn

P

S

Ni

Cr

Cu

Al

Ti

Al+Ti

Fe

Min

0.06

30.0

19.0

0.15

0.15

39.5

Max

0.10

1.0

1.5

0.015

35.0

23.0

0.75

0.60

0.60


The mechanical property of UNS N08811 spring is as follows

0.2% Yield strength
 (MPA)

Tensile strength
 (MPA)

Elongation
 (%)

Hardness

(HV)

(HB)

≥ 170

≥ 450

≥ 30


We could do solution treatment and ageing treatment for UNS N08811 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N08811 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N08811 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO8811 springs are widely used in Chemical industry,Aerospace,Heat treating industry,Pulp and paper industry,Food processing,Nuclear Engineering,Gas turbine components and so on


Please send us the drawing of UNS N08811 springs that you need, we are glad to quote the best price for your side.

Except UNS N08811 Springs,we also could produce UNS N08811 flanges,UNS N08811 plates,UNS N08811 fastener,UNS N08811 bolts,UNS N08811 fittings,UNS N08811 pipes,UNS N08811 tubes,UNS N08811 bars