Products

UNS N07080 Springs
Home > Products > Springs

We could produce UNS N07080 springs,UNS NO7080 springs,UNS NO7080 Compression Springs,UNS N07080 Extension Springs,UNS N07080 Torsion Springs,UNS NO7080 tension spring, UNS N07080 disc spring, UNS N07080 wave spring,UNS NO7080 Spiral Springs,UNS N07080 Automotive Springs,UNS N07080 Elevator Springs,UNS N07080 coil springs,UNS N07080 Conical Springs,UNS N07080 Tapered Springs,UNS N07080 Barrel Springs,UNS NO7080 die springs,UNS NO7080 Constant Force Springs,UNS NO7080 Power Springs,UNS NO7080 Garter Springs,UNS N07080 retaining Springs,UNS N07080 Volute Springs,UNS N07080 flat springs,UNS N07080 Volute Springs,UNS N07080 battery springs,UNS N07080 Spring Clips,UNS N07080 Battery Contacts from china

The diameter of UNS N07080 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N07080 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N07080 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N07080 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N07080  is a wrought, age-hardenable nickel-chromium alloy.


The chemical composition of UNS NO7080 springs is as follows

Element

Content (%)

Cr

18-21

Fe

3

Ti

1.8-2.7

Al

1-1.8

Si

1

Mn

1

Cu

0.2

Co

0.2

C

0.1

P

0.045

B

0.008

Ni

Balance


The mechanical property of UNS N07080 spring is as follows

Properties

Imperial

Tensile  strength (Precipitation hardened)

181000 psi

Yield  strength (Precipitation hardened)

113000 psi

Elongation  at break (Precipitation hardened)

30%


We could do solution treatment and ageing treatment for UNS N07080 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N07080 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N07080 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO7080 springs are widely used in mechanical engineering, in harbour cranes, ship deck cranes, truck cranes and construction cranes as well as in excavators, antenna systems, in aviation and aerospace, in the offshore technology, rail vehicles, telescopes, tunnelling machines, wind energy turbines, underwater turbines and solar energy plants and so on


Please send us the drawing of UNS N07080 springs that you need, we are glad to quote the best price for your side.

Except UNS N07080 Springs,we also could produce UNS N07080 flanges,UNS N07080 plates,UNS N07080 fastener,UNS N07080 bolts,UNS N07080 fittings,UNS N07080 pipes,UNS N07080 tubes,UNS N07080 bars