Products

UNS N07001 Springs
Home > Products > Springs

We could produce UNS N07001 springs,UNS NO7001 springs,UNS NO7001 Compression Springs,UNS N07001 Extension Springs,UNS N07001 Torsion Springs,UNS NO7001 tension spring, UNS N07001 disc spring, UNS N07001 wave spring,UNS NO7001 Spiral Springs,UNS N07001 Automotive Springs,UNS N07001 Elevator Springs,UNS N07001 coil springs,UNS N07001 Conical Springs,UNS N07001 Tapered Springs,UNS N07001 Barrel Springs,UNS NO7001 die springs,UNS NO7001 Constant Force Springs,UNS NO7001 Power Springs,UNS NO7001 Garter Springs,UNS N07001 retaining Springs,UNS N07001 Volute Springs,UNS N07001 flat springs,UNS N07001 Volute Springs,UNS N07001 battery springs,UNS N07001 Spring Clips,UNS N07001 Battery Contacts from china

The diameter of UNS N07001 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N07001 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N07001 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N07001 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N07001  is a vacuum-inducting nickel-based superalloy that’s ideal for high-temperature use.


The chemical composition of UNS NO7001 springs is as follows

Chemical Properties

Element

min

max

C

0.02

0.10

Mn

0.10

Si

0.15

P

0.015

S

0.015

Cr

18.00

21.00

Co

12.00

15.00

Mo

3.50

5.00

Ti

2.75

3.25

Al

1.20

1.60

Zr

0.02

0.08

B

0.003

0.010

Fe

2.00

Cu

0.10

Pb

0.0005 (5 ppm)

Bismuth

0.00003 (0.3 ppm)

Se

0.0003 (3 ppm)

Silver

0.0005 (5 ppm)

Ni

remainder


The mechanical property of UNS N07001 spring is as follows

Material

Condtion

Thickness

Temp

Tensile  Strength MPA

Yield  Strength MPA

Elongation  in 4D

Hardness  HRC

UNS  N07001

Sol  Treated, Stabilization + Precipitation HT

0-0.020"

Room

1165

754

15

34-44


We could do solution treatment and ageing treatment for UNS N07001 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N07001 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N07001 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO7001 springs are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on


Please send us the drawing of UNS N07001 springs that you need, we are glad to quote the best price for your side.

Except UNS N07001 Springs,we also could produce UNS N07001 flanges,UNS N07001 plates,UNS N07001 fastener,UNS N07001 bolts,UNS N07001 fittings,UNS N07001 pipes,UNS N07001 tubes,UNS N07001 bars