Products

UNS N06950 Springs
Home > Products > Springs

We could produce UNS N06950 springs,UNS NO6950 springs,UNS NO6950 Compression Springs,UNS N06950 Extension Springs,UNS N06950 Torsion Springs,UNS NO6950 tension spring, UNS N06950 disc spring, UNS N06950 wave spring,UNS NO6950 Spiral Springs,UNS N06950 Automotive Springs,UNS N06950 Elevator Springs,UNS N06950 coil springs,UNS N06950 Conical Springs,UNS N06950 Tapered Springs,UNS N06950 Barrel Springs,UNS NO6950 die springs,UNS NO6950 Constant Force Springs,UNS NO6950 Power Springs,UNS NO6950 Garter Springs,UNS N06950 retaining Springs,UNS N06950 Volute Springs,UNS N06950 flat springs,UNS N06950 Volute Springs,UNS N06950 battery springs,UNS N06950 Spring Clips,UNS N06950 Battery Contacts from china

The diameter of UNS N06950 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N06950 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N06950 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N06950 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N06950  is supplied as oil: country tubular goods for service in severe deep sour gas well environments, especially those high in hydrogen sulfide and carbon dioxide conten


The chemical composition of UNS NO6950 springs is as follows

Aluminum

0.4 max

Carbon

0.02 max

Chromium

19 - 21

Cobalt

2.5 min

Copper

0.5 max

Iron

15 - 20

Manganese

1 max

Molybdenum

8 - 10

Nickel

Balance

Niobium

0.5 max

Phosphorus

0.04 max

Silicon

1 max

Sulphur

0.015 max

Tungsten

1 max


The mechanical property of UNS N06950 spring is as follows

Properties

Metric

Tensile strength

≥ 760 MPa

Yield strength (@ strain 0.200%)

700-860 MPa

Elongation at break (in 50 mm)

≥ 20%

Hardness, Brinell (estimated from Rockwell C for  Brinell 10 mm ball/3000 kg load)

290

Hardness, Knoop (estimated from Rockwell C)

345

Hardness, Rockwell A (estimated from Rockwell C)

66

Hardness, Rockwell C

≤ 31

Hardness, Vickers (estimated from Rockwell C)

300


We could do solution treatment and ageing treatment for UNS N06950 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N06950 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N06950 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO6950 springs are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


Please send us the drawing of UNS N06950 springs that you need, we are glad to quote the best price for your side.

Except UNS N06950 Springs,we also could produce UNS N06950 flanges,UNS N06950 plates,UNS N06950 fastener,UNS N06950 bolts,UNS N06950 fittings,UNS N06950 pipes,UNS N06950 tubes,UNS N06950 bars