Products

UNS N06693 Springs
Home > Products > Springs

We could produce UNS N06693 springs,UNS NO6693 springs,UNS NO6693 Compression Springs,UNS N06693 Extension Springs,UNS N06693 Torsion Springs,UNS NO6693 tension spring, UNS N06693 disc spring, UNS N06693 wave spring,UNS NO6693 Spiral Springs,UNS N06693 Automotive Springs,UNS N06693 Elevator Springs,UNS N06693 coil springs,UNS N06693 Conical Springs,UNS N06693 Tapered Springs,UNS N06693 Barrel Springs,UNS NO6693 die springs,UNS NO6693 Constant Force Springs,UNS NO6693 Power Springs,UNS NO6693 Garter Springs,UNS N06693 retaining Springs,UNS N06693 Volute Springs,UNS N06693 flat springs,UNS N06693 Volute Springs,UNS N06693 battery springs,UNS N06693 Spring Clips,UNS N06693 Battery Contacts from china

The diameter of UNS N06693 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N06693 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N06693 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N06693 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N06693 is a candidate for service in hightemperature waste and biomass incinerators at temperatures above 700°C (1292°F), where fuel ash corrosion, chloridation and sulfidation can cause rapid failure of traditional materials


The chemical composition of UNS NO6693 springs is as follows

Ni¹

min.

58.0

%

Cr

27.0 -

31.0

%

Fe

7.0 -

11.0

%

Cu

max.

0.50

%

Mn

max.

0.50

%

Si

max.

0.50

%

C

max.

0.05

%

S

max.

0.015

%

Limiting


The mechanical property of UNS N06693 spring is as follows

Key properties (in annealedcondition)

·        Tensile strength: 76560.00 PSI MIN

·        Yield strength: 18560.00 PSI MIN

·        Elongation: 45.00–0.00%


We could do solution treatment and ageing treatment for UNS N06693 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N06693 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N06693 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO6693 springs are widely used in Sulphuric acid piping and vessels,Phosphoric acid evaporators, Pickling tank heaters, pickling tanks and equipment,Chemical process equipmentTank trucks,Calorifiers,Electrostatic precipitator electrodes,Hot vessels for food, water and seawater,ammonium sulphate vessels,Expansion bellows, Marine exhaust systems,Power station ash hoppers and so on


Please send us the drawing of UNS N06693 springs that you need, we are glad to quote the best price for your side.

Except UNS N06693 Springs,we also could produce UNS N06693 flanges,UNS N06693 plates,UNS N06693 fastener,UNS N06693 bolts,UNS N06693 fittings,UNS N06693 pipes,UNS N06693 tubes,UNS N06693 bars