Products

UNS N06075 Springs
Home > Products > Springs

We could produce UNS N06075 springs,UNS NO6075 springs,UNS NO6075 Compression Springs,UNS N06075 Extension Springs,UNS N06075 Torsion Springs,UNS NO6075 tension spring, UNS N06075 disc spring, UNS N06075 wave spring,UNS NO6075 Spiral Springs,UNS N06075 Automotive Springs,UNS N06075 Elevator Springs,UNS N06075 coil springs,UNS N06075 Conical Springs,UNS N06075 Tapered Springs,UNS N06075 Barrel Springs,UNS NO6075 die springs,UNS NO6075 Constant Force Springs,UNS NO6075 Power Springs,UNS NO6075 Garter Springs,UNS N06075 retaining Springs,UNS N06075 Volute Springs,UNS N06075 flat springs,UNS N06075 Volute Springs,UNS N06075 battery springs,UNS N06075 Spring Clips,UNS N06075 Battery Contacts from china

The diameter of UNS N06075 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N06075 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N06075 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N06075 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N06075 is a creep-resistant nickel-chromiumiron alloy with controlled carbon content and a small addition of titanium


The chemical composition of UNS NO6075 springs is as follows

·        Chromium:18.00-21.00%

·        Iron:5.00-0.00% max

·        Manganese:1.00-0.00%

·        Silicon:1.00-0.00%

·        Copper:0.50-0.00% max

·        Titanium:0.20-0.60%

·        Carbon:0.08-0.15%

·        Nickel:Balance


The mechanical property of UNS N06075 spring is as follows

Key properties (in annealedcondition)

·        Tensile strength: 781.00–0.00 MPA

·        Yield strength: 343.00–0.00 MPA

·        Elongation: 40.00–0.00%


We could do solution treatment and ageing treatment for UNS N06075 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N06075 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N06075 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO6075 springs are widely used in equipment for the manufacture of synthetic rubber, plastics, organic and heavy chemicals, pharmaceuticals, solvents and explosives, petroleum products, etc. Also employed in heat exchangers, mixing tanks, metal cleaning and pickling equipment and process piping and so on


Please send us the drawing of UNS N06075 springs that you need, we are glad to quote the best price for your side.

Except UNS N06075 Springs,we also could produce UNS N06075 flanges,UNS N06075 plates,UNS N06075 fastener,UNS N06075 bolts,UNS N06075 fittings,UNS N06075 pipes,UNS N06075 tubes,UNS N06075 bars