Products

UNS N04401 Springs
Home > Products > Springs

We could produce UNS N04401 springs,UNS NO4401 springs,UNS NO4401 Compression Springs,UNS N04401 Extension Springs,UNS N04401 Torsion Springs,UNS NO4401 tension spring, UNS N04401 disc spring, UNS N04401 wave spring,UNS NO4401 Spiral Springs,UNS N04401 Automotive Springs,UNS N04401 Elevator Springs,UNS N04401 coil springs,UNS N04401 Conical Springs,UNS N04401 Tapered Springs,UNS N04401 Barrel Springs,UNS NO4401 die springs,UNS NO4401 Constant Force Springs,UNS NO4401 Power Springs,UNS NO4401 Garter Springs,UNS N04401 retaining Springs,UNS N04401 Volute Springs,UNS N04401 flat springs,UNS N04401 Volute Springs,UNS N04401 battery springs,UNS N04401 Spring Clips,UNS N04401 Battery Contacts from china

The diameter of UNS N04401 springs that we could do range from 0.30 mm to 3.00 mm.

As per Surface finish of UNS N04401 springs, we could do grinding ,presetting ,deburring ,shot peening ,vibratory finishing ,passivating,painting ,heat setting,stress relief ,end forming,threading ,coining,chamfering ,knurling ,welding ,assembly,grooving ,flatting and so on

As per Coatings of of UNS N04401 springs, we could do chrome,Teflon, corvel,pain,color coding,zinc plating,black oxide,precoated wire and so on

Our UNS N04401 Springs could undergo either bainitic hardening after forming (carbon) or vacuum hardening and annealing (stainless).or come in pre-hardened As per the requirement of the clients

UNS N04401 is higher in copper content than Monel 400 for better electrical properties  


The chemical composition of UNS NO4401 springs is as follows

Nickel.................................40.0-45.0

Carbon...............................0.10max.

Manganese.........................2.25max.

Iron....................................0.75max.

Cobalt.................................0.25max.

Sulfur..................................0.015max.

Silicon.................................0.25max.

Copper................................Balance*


The mechanical property of UNS N04401 spring is as follows

Tensile Strength, ksi..................................................................MIN64

MPa.............................................................MIN 441

Yield Strength (0.2% Offset),ksi...........................................MIN.19.5

MPa........................................MIN..134

Elongation,%..........................................................................MIN .51

Hardness,Rb............................................................................43


We could do solution treatment and ageing treatment for UNS N04401 springs as per the requirement of the clients.

We could supply inspection certificate of UNS N04401 springs by third party,like TUV,DNV,GL,BV,SGS and so on

We analyze your UNS N04401 spring design and make recommendations to improve quality and reduce cost. Whether you have a sample, drawing or idea, our engineering team is ready to offer you design assistance and material recommendation to best fit your application as well as your budget. We are easy to talk to, well-prepared and ready to put our expertise to work for you.

Our UNS NO4401 springs are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on


Please send us the drawing of UNS N04401 springs that you need, we are glad to quote the best price for your side.

Except UNS N04401 Springs,we also could produce UNS N04401 flanges,UNS N04401 plates,UNS N04401 fastener,UNS N04401 bolts,UNS N04401 fittings,UNS N04401 pipes,UNS N04401 tubes,UNS N04401 bars