Products

VASCOMAX C250 Plates
Home > Products > Plates

We produce VASCOMAX C250 Plates,VASCOMAX C250 Sheets,VASCOMAX C250 Coils, VASCOMAX C250 Strips,VASCOMAX C-250 Plates,VASCOMAX C-250 Sheets,VASCOMAX C-250 Coils, VASCOMAX C-250 Strips,VASCOMAX C250 cold rolled strips,VASCOMAX C250 hot rolled strips,VASCOMAX C250 hot rolled plates, VASCOMAX C250 cold rolled plates from china

We could produce  VASCOMAX C250 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of VASCOMAX C250 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of VASCOMAX C250 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of VASCOMAX C-250 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce VASCOMAX C250 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any VASCOMAX C250 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our VASCOMAX C250 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of VASCOMAX C250 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

VASCOMAX C250  is the lowest strength of the maraging steels


We could produce VASCOMAX C250 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of VASCOMAX C250  plates,sheets,coils,strips is as follows

Chemical Analysis

C

.03 max

MN

.10 max

P

.01 max

S

.01 max

Si

.10 max

Cr

Ni

18.50

Mo

4.80

Cu

Co

7.50

Cb

Ti

.40

Al

.10

Fe

B

.004

Zr

.01


The mechanical property of VASCOMAX C250  plates,sheets,coils,strips is as follows

Material

Condition

Ultimate  Tensile (min)

Yield  Strength (Min)

Elongation  in 4D % (min)

Hardness

Mpa

Ksi

Mpa

Ksi

Vascomax  C250

After  Maraging heat treatment 900°F

1758

255

1724

250

6

≥ 48 HRC


We will do 100% UT test for VASCOMAX C250 plates,sheets,coils,strips

We could supply VASCOMAX C-250  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our VASCOMAX C250 plates,sheets,coils,strips are widely used in Flue gas scrubbers,Chlorination systems,Acid production and pickling systems,Outlet ducting and stack liners for power plants,Sulfur dioxide scrubbers,Pulp and paper bleach plants,Weld overlay of less corrosion resistant metals,Pesticide and other agrichemical production,Tubular heat exchangers

Plate heat exchangers,Nuclear fuel reprocessing,incineration scrubber systems and so on


In order to produce VASCOMAX C250 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of VASCOMAX C250 plates,VASCOMAX C250 sheets,VASCOMAX C250 coils,VASCOMAX C250 strips that you need, we are glad to quote the best price

Except VASCOMAX C250 plates,we also could produce VASCOMAX C250 flanges,VASCOMAX C250 bars,VASCOMAX C250 fastener,VASCOMAX C250 bolts,VASCOMAX C250 fittings,VASCOMAX C250 pipes,VASCOMAX C250 tubes,VASCOMAX C250 springs