Products

UNS S34800 Plates
Home > Products > Plates

We produce UNS S34800 Plates,UNS S34800 Sheets,UNS S34800 Coils, UNS S34800 Strips,S34800 Plates,S34800 Sheets,S34800 Coils, S34800 Strips,UNS S34800 cold rolled strips,UNS S34800 hot rolled strips,UNS S34800 hot rolled plates, UNS S34800 cold rolled plates from china

We could produce  UNS S34800 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS S34800 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS S34800 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of S34800 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS S34800 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS S34800 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS S34800 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS S34800 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS S34800 uses stabilizing elements such as columbium or tantalum to increase intergranular corrosion resistance.


We could produce UNS S34800 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS S34800  plates,sheets,coils,strips is as follows

Element

Content (%)

Iron

66

Chromium

19

Nickel

11

Manganese

2.0

Silicon

1.0

Nb + Ta

0.8

Cobalt

0.2

Tantalum

0.1

Carbon

0.080

Phosphorous

0.045

Sulfur

0.030


The mechanical property of UNS S34800  plates,sheets,coils,strips is as follows

Properties

Metric

Imperial

Tensile strength

655 MPa

95000 psi

Yield strength (@ strain 0.200%)

275 MPa

39900 psi

Charpy impact

160 J

118 ft-lb

Elongation at break (in 50 mm)

45%

45%

Hardness, Brinell (converted from Rockwell B hardness)

147

147


We will do 100% UT test for UNS S34800 plates,sheets,coils,strips

We could supply S34800  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS S34800 plates,sheets,coils,strips are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on


In order to produce UNS S34800 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS S34800 plates,UNS S34800 sheets,UNS S34800 coils,UNS S34800 strips that you need, we are glad to quote the best price

Except UNS S34800 plates,we also could produce UNS S34800 flanges,UNS S34800 bars,UNS S34800 fastener,UNS S34800 bolts,UNS S34800 fittings,UNS S34800 pipes,UNS S34800 tubes,UNS S34800 springs