Products

UNS S32750 Plates
Home > Products > Plates

We produce UNS S32750 Plates,UNS S32750 Sheets,UNS S32750 Coils, UNS S32750 Strips,S32750 Plates,S32750 Sheets,S32750 Coils, S32750 Strips,UNS S32750 cold rolled strips,UNS S32750 hot rolled strips,UNS S32750 hot rolled plates, UNS S32750 cold rolled plates from china

We could produce  UNS S32750 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS S32750 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS S32750 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of S32750 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS S32750 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS S32750 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS S32750 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS S32750 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS S32750 is the most common SuperDuplex alloy which contains 24% chromium and a minimum of 3% molybdenum.

We could produce UNS S32750 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS S32750  plates,sheets,coils,strips is as follows

C

Si

Mn

P

S

Cr

Ni

Mo

N

Cu

max

max

max

max

max

max

0.030

0.8

1.2

0.035

0.015

25

7

4

0.3

0.5


The mechanical property of UNS S32750  plates,sheets,coils,strips is as follows

ypical Mechanical Properties

Roomtemperature - Annealed Condition

Tensile Strength

Yield Strength

.2% proof

Elongation

%

Hardness

109-136 KSI

80 KSI

25%

290HB max


We will do 100% UT test for UNS S32750 plates,sheets,coils,strips

We could supply S32750  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS S32750 plates,sheets,coils,strips are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


In order to produce UNS S32750 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS S32750 plates,UNS S32750 sheets,UNS S32750 coils,UNS S32750 strips that you need, we are glad to quote the best price

Except UNS S32750 plates,we also could produce UNS S32750 flanges,UNS S32750 bars,UNS S32750 fastener,UNS S32750 bolts,UNS S32750 fittings,UNS S32750 pipes,UNS S32750 tubes,UNS S32750 springs