Products

UNS S31600 Plates
Home > Products > Plates

We produce UNS S31600 Plates,UNS S31600 Sheets,UNS S31600 Coils, UNS S31600 Strips,S31600 Plates,S31600 Sheets,S31600 Coils, S31600 Strips,UNS S31600 cold rolled strips,UNS S31600 hot rolled strips,UNS S31600 hot rolled plates, UNS S31600 cold rolled plates from china

We could produce  UNS S31600 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS S31600 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS S31600 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of S31600 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS S31600 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS S31600 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS S31600 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS S31600 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS S31600 has good oxidation resistance in intermittent service to 870°C and in continuous service to 925°C.


We could produce UNS S31600 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS S31600  plates,sheets,coils,strips is as follows

AISI   316

Element

Min

Max

C

-

0.08

Mn

-

2

Ni

10

14

Cr

16

18

Mo

2

3

S

-

0.03

Si

-

1

P

-

0.045


The mechanical property of UNS S31600  plates,sheets,coils,strips is as follows

Grade

Tensile Strength
 MPA (min)

Yield Strength
 0.2% MPA (min)

Elongation %

Hardness (Brinell) MAX

Hardness
 (Rockwell B) MAX

AISI  316

514

206

40

217

95


We will do 100% UT test for UNS S31600 plates,sheets,coils,strips

We could supply S31600  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS S31600 plates,sheets,coils,strips are widely used in Marine engineering,Chemical and hydrocarbon processing equipment,Gasoline and freshwater tanks,Crude petroleum stills,De-aerating heaters,Boiler feed water heaters and other heat exchangers,Valves, pumps,Industrial heat exchangers,Chlorinated solvents,Crude oil distillation towers


In order to produce UNS S31600 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS S31600 plates,UNS S31600 sheets,UNS S31600 coils,UNS S31600 strips that you need, we are glad to quote the best price

Except UNS S31600 plates,we also could produce UNS S31600 flanges,UNS S31600 bars,UNS S31600 fastener,UNS S31600 bolts,UNS S31600 fittings,UNS S31600 pipes,UNS S31600 tubes,UNS S31600 springs