Products

UNS S31009 Plates
Home > Products > Plates

We produce UNS S31009 Plates,UNS S31009 Sheets,UNS S31009 Coils, UNS S31009 Strips,S31009 Plates,S31009 Sheets,S31009 Coils, S31009 Strips,UNS S31009 cold rolled strips,UNS S31009 hot rolled strips,UNS S31009 hot rolled plates, UNS S31009 cold rolled plates from china

We could produce  UNS S31009 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS S31009 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS S31009 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of S31009 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS S31009 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS S31009 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS S31009 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS S31009 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS S31009 has a carbon content restricted to exclude the lower end of the 310 range, so is the grade of choice for high temperature applications.


We could produce UNS S31009 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS S31009  plates,sheets,coils,strips is as follows

Element

Content (%)

Fe

49.075-45.865

Cr

24-26

Ni

19-22

Mn

2

Si

0.75

P

0.045

C

0.040-0.10

S

0.03


The mechanical property of UNS S31009  plates,sheets,coils,strips is as follows

Properties

Metric

Tensile  strength

515 MPa

Yield  strength

205 MPa

Elongation  at break (in 50 mm)

40%

Hardness,  Rockwell B

95

Hardness,  Brinell

217


We will do 100% UT test for UNS S31009 plates,sheets,coils,strips

We could supply S31009  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS S31009 plates,sheets,coils,strips are widely used in Oil Refineries,Valve & Wellhead equipment manufacturers,Chemical & Petrochemical Complexes,Oil & Gas industries,Heat Exchanger manufacturers,Pressure Vessel manufacturers,Fertilizer Plants,Thermal Power Plants,Nuclear Power Plants,Original Equipment manufacturers to Oil & Gas Industries,Engineering & Process Management Consultants and so on


In order to produce UNS S31009 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS S31009 plates,UNS S31009 sheets,UNS S31009 coils,UNS S31009 strips that you need, we are glad to quote the best price

Except UNS S31009 plates,we also could produce UNS S31009 flanges,UNS S31009 bars,UNS S31009 fastener,UNS S31009 bolts,UNS S31009 fittings,UNS S31009 pipes,UNS S31009 tubes,UNS S31009 springs