Products

UNS S15700 Plates
Home > Products > Plates

We produce UNS S15700 Plates,UNS S15700 Sheets,UNS S15700 Coils, UNS S15700 Strips,S15700 Plates,S15700 Sheets,S15700 Coils, S15700 Strips,UNS S15700 cold rolled strips,UNS S15700 hot rolled strips,UNS S15700 hot rolled plates, UNS S15700 cold rolled plates from china

We could produce  UNS S15700 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS S15700 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS S15700 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of S15700 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS S15700 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS S15700 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS S15700 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS S15700 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS S15700 is a semi-austenitic precipitation hardening stainless steel. It combines moderate corrosion resistance with high strength and hardness at operating temperatures up to 900 F.



We could produce UNS S15700 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS S15700  plates,sheets,coils,strips is as follows

Element

Min

Max

Carbon

--

0.09

Manganese

--

1.00

Silicon

--

1.00

Chromium

14.0

16.0

Nickel

6.50

7.75

Sulfur

--

0.04

Phosphorus

--

0.04

Molybdenum

2.00

3.00

Aluminum

0.75

1.50


The mechanical property of UNS S15700  plates,sheets,coils,strips is as follows

Mechanical Properties, Solution Heat Treated

Nominal Thickness Inches

Tensile Strength MPA max

Yield Strength at 0.2% Offset MPA, max

Elongation In 2 Inches or 4D %, min

0.005 and over

1028

445

25


We will do 100% UT test for UNS S15700 plates,sheets,coils,strips

We could supply S15700  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS S15700 plates,sheets,coils,strips are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


In order to produce UNS S15700 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS S15700 plates,UNS S15700 sheets,UNS S15700 coils,UNS S15700 strips that you need, we are glad to quote the best price

Except UNS S15700 plates,we also could produce UNS S15700 flanges,UNS S15700 bars,UNS S15700 fastener,UNS S15700 bolts,UNS S15700 fittings,UNS S15700 pipes,UNS S15700 tubes,UNS S15700 springs