Products

UNS S15500 Plates
Home > Products > Plates

We produce UNS S15500 Plates,UNS S15500 Sheets,UNS S15500 Coils, UNS S15500 Strips,S15500 Plates,S15500 Sheets,S15500 Coils, S15500 Strips,UNS S15500 cold rolled strips,UNS S15500 hot rolled strips,UNS S15500 hot rolled plates, UNS S15500 cold rolled plates from china

We could produce  UNS S15500 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS S15500 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS S15500 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of S15500 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS S15500 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS S15500 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS S15500 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS S15500 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS S15500 is a precipitation hardening martensitic stainless steel.


We could produce UNS S15500 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS S15500  plates,sheets,coils,strips is as follows

C

Si

Mn

P

S

Cr

Mo

Ni

Cb

Cu

Fe

Min

-

-

-

-

-

14.00

-

3.50

5 x %

2.50

Bal

Max

0.07

1.00

1.00

0.030

0.015

15.50

0.50

5.50

0.45

4.50

-


The mechanical property of UNS S15500  plates,sheets,coils,strips is as follows

Properties

Metric

Ultimate Tensile Strength

1380 MPa

Yield Strength

1275 MPa

Elongation at Break

10%

Hardness, Brinell

420

Hardness, Knoop

451

Hardness, Rockwell B

104

Hardness, Rockewell C

44.2

Hardness, Vickers

445

Charpy Impact

10 J


We will do 100% UT test for UNS S15500 plates,sheets,coils,strips

We could supply S15500  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS S15500 plates,sheets,coils,strips are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on


In order to produce UNS S15500 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS S15500 plates,UNS S15500 sheets,UNS S15500 coils,UNS S15500 strips that you need, we are glad to quote the best price

Except UNS S15500 plates,we also could produce UNS S15500 flanges,UNS S15500 bars,UNS S15500 fastener,UNS S15500 bolts,UNS S15500 fittings,UNS S15500 pipes,UNS S15500 tubes,UNS S15500 springs