Products

UNS N30188 Plates
Home > Products > Plates

We produce UNS N30188 Plates,UNS N30188 Sheets,UNS N30188 Coils, UNS N30188 Strips,N30188 Plates,N30188 Sheets,N30188 Coils, N30188 Strips,UNS N30188 cold rolled strips,UNS N30188 hot rolled strips,UNS N30188 hot rolled plates, UNS N30188 cold rolled plates from china

We could produce  UNS N30188 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N30188 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N30188 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of N30188 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N30188 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N30188 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N30188 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N30188 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N30188 combines excellent high-temperature strength with good resistance to both oxidizing environments up to 2000°F and to sulfate deposit hot corrosion.


We could produce UNS N30188 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N30188  plates,sheets,coils,strips is as follows

C

.05  - .15

MN

1.25  max

P

.020  max

S

.015  max

Si

.20  - .50

Cr

21.0  -23.0

Ni

20.0  - 24.0

Mo

Cu

Co

bal

Cb

Ti

B

.015  max

Fe

3.0  max

W

13.0  -15.0

La

.03  - .15


The mechanical property of UNS N30188  plates,sheets,coils,strips is as follows

Material

Temp°F

Yield  Strength (0.2% Offset) min

Tensile  Strength min

Elongation  (%)

Hardness

ksi

ksi

UNS  R30188

RT

55

125

45

≤302HB


We will do 100% UT test for UNS N30188 plates,sheets,coils,strips

We could supply N30188  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N30188 plates,sheets,coils,strips are widely used in chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.


In order to produce UNS N30188 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N30188 plates,UNS N30188 sheets,UNS N30188 coils,UNS N30188 strips that you need, we are glad to quote the best price

Except UNS N30188 plates,we also could produce UNS N30188 flanges,UNS N30188 bars,UNS N30188 fastener,UNS N30188 bolts,UNS N30188 fittings,UNS N30188 pipes,UNS N30188 tubes,UNS N30188 springs