Products

UNS N19909 Plates
Home > Products > Plates

We produce UNS N19909 Plates,UNS N19909 Sheets,UNS N19909 Coils, UNS N19909 Strips,N19909 Plates,N19909 Sheets,N19909 Coils, N19909 Strips,UNS N19909 cold rolled strips,UNS N19909 hot rolled strips,UNS N19909 hot rolled plates, UNS N19909 cold rolled plates from china

We could produce  UNS N19909 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N19909 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N19909 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of N19909 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N19909 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N19909 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N19909 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N19909 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N19909  is a nickel-cobalt-iron alloy with high strength and a stable, or constant, coefficient of thermal expansion and constant modulus of elasticity.


We could produce UNS N19909 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N19909  plates,sheets,coils,strips is as follows

Elements

Content (%)

Fe

42

Ni

38

Co

13

Nb

4.7

Ti

1.5

Si

0.4

Al

0.03

C

0.01


The mechanical property of UNS N19909  plates,sheets,coils,strips is as follows

Tensile Properties (At Room Temp)

Property

Value

Tensile Strength

175 ksi

Yield Strength at  0.2% Offset

140 ksi

Elongation in 4D

8%

Reduction of Area

12%


We will do 100% UT test for UNS N19909 plates,sheets,coils,strips

We could supply N19909  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N19909 plates,sheets,coils,strips are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


In order to produce UNS N19909 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N19909 plates,UNS N19909 sheets,UNS N19909 coils,UNS N19909 strips that you need, we are glad to quote the best price

Except UNS N19909 plates,we also could produce UNS N19909 flanges,UNS N19909 bars,UNS N19909 fastener,UNS N19909 bolts,UNS N19909 fittings,UNS N19909 pipes,UNS N19909 tubes,UNS N19909 springs