Products

UNS N19903 Plates
Home > Products > Plates

We produce UNS N19903 Plates,UNS N19903 Sheets,UNS N19903 Coils, UNS N19903 Strips,N19903 Plates,N19903 Sheets,N19903 Coils, N19903 Strips,UNS N19903 cold rolled strips,UNS N19903 hot rolled strips,UNS N19903 hot rolled plates, UNS N19903 cold rolled plates from china

We could produce  UNS N19903 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N19903 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N19903 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of N19903 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N19903 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N19903 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N19903 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N19903 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N19903 combines high strength with a low and constant coefficient of thermal expansion at temperatures to about 800°F (430°C)

We could produce UNS N19903 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N19903  plates,sheets,coils,strips is as follows

Table 1 - Limiting Composition, wt %

Ni..........................................................................36.0-40.0

Co..........................................................................13.0-17.0

Al ....................................................................0.30-1.15

Ti.......................................................................1.00-1.85

Nb.......................................................................2.40-3.50

Fe...............................................................................Balance*


The mechanical property of UNS N19903  plates,sheets,coils,strips is as follows

Properties

Metric

Imperial

Tensile  strength (precipitation hardened)

1310 MPa

190000 psi

Yield  strength (@ strain 0.200 %, precipitation hardened)

1100 MPa

160000 psi

Elastic  modulus (@ 0°C/32°F)

146.8 GPa

21290 ksi

Poisson's  ratio (@ 250°C/482°F)

0.226

0.226

Elongation  at break (precipitation hardened)

14%

14%


We will do 100% UT test for UNS N19903 plates,sheets,coils,strips

We could supply N19903  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N19903 plates,sheets,coils,strips are widely used in Quarry & Opencast Mine Maintenance ,Mining & Excavation Plant Equipment ,Deep Mining Pit Maintenance & Repair ,Conveyor Equipment Manufacturers .Mine Construction & Site Extension Construction Impact, Jaw & Cone Crusher Manufacturers,Drilling, Scalping & Screener Equipment Manufacturers and so on


In order to produce UNS N19903 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N19903 plates,UNS N19903 sheets,UNS N19903 coils,UNS N19903 strips that you need, we are glad to quote the best price

Except UNS N19903 plates,we also could produce UNS N19903 flanges,UNS N19903 bars,UNS N19903 fastener,UNS N19903 bolts,UNS N19903 fittings,UNS N19903 pipes,UNS N19903 tubes,UNS N19903 springs