Products

UNS N13017 Plates
Home > Products > Plates

We produce UNS N13017 Plates,UNS N13017 Sheets,UNS N13017 Coils, UNS N13017 Strips,N13017 Plates,N13017 Sheets,N13017 Coils, N13017 Strips,UNS N13017 cold rolled strips,UNS N13017 hot rolled strips,UNS N13017 hot rolled plates, UNS N13017 cold rolled plates from china

We could produce  UNS N13017 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N13017 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N13017 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of N13017 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N13017 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N13017 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N13017 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N13017 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N13017 is  nickel-based superalloys

We could produce UNS N13017 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N13017  plates,sheets,coils,strips is as follows

Element

Minimum (weight %)

Maximum (weight %)

Typical (weight %)

Mo

5.0

Al

4.0

Ti

3.5

Co

17.0

Cr

15.0

C

0.04

B

0.025

Ni

Balance


The mechanical property of UNS N13017  plates,sheets,coils,strips is as follows

Tensile Strength

ksi

MPa

185 min

1,275 min



Yield Strength

ksi

MPa

140 min

965 min



Hardness

36 HRC max



Elongation

10% min


We will do 100% UT test for UNS N13017 plates,sheets,coils,strips

We could supply N13017  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N13017 plates,sheets,coils,strips are widely used in Heat shields,Combustion and chimney liners,Valves,Piping,Distillation columns,Bubble caps,Reaction vessels Heat exchangers,Furnace,Gas turbine engine duct work,Equipment used to produce acid and so on


In order to produce UNS N13017 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N13017 plates,UNS N13017 sheets,UNS N13017 coils,UNS N13017 strips that you need, we are glad to quote the best price

Except UNS N13017 plates,we also could produce UNS N13017 flanges,UNS N13017 bars,UNS N13017 fastener,UNS N13017 bolts,UNS N13017 fittings,UNS N13017 pipes,UNS N13017 tubes,UNS N13017 springs