Products

UNS N10629 Plates
Home > Products > Plates

We produce UNS N10629 Plates,UNS N10629 Sheets,UNS N10629 Coils, UNS N10629 Strips,N10629 Plates,N10629 Sheets,N10629 Coils, N10629 Strips,UNS N10629 cold rolled strips,UNS N10629 hot rolled strips,UNS N10629 hot rolled plates, UNS N10629 cold rolled plates from china

We could produce  UNS N10629 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N10629 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N10629 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of N10629 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N10629 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N10629 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N10629 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N10629 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N10629 is an additional member of the nickel-molybdenum family of alloys with excellent resistance to hydrochloric acid at all concentrations and temperatures


We could produce UNS N10629 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N10629  plates,sheets,coils,strips is as follows

Chemical composition

UNS N10629

C

Si

Mn

P

S

Cr

Mo

Ni

Co

Cu

Fe

Al

min.%

0,5

26,0

65,0

2,0

0,10

max.%

0,01

0,05

1,5

0,02

0,01

1,5

30,0

2,5

0,50

6,0

0,50


The mechanical property of UNS N10629  plates,sheets,coils,strips is as follows

Grade

Tensile
 strenght
 min N/mm2

Yeld point
 min N/mm2

Elongation 2" min %

Hardness
 max HB

Hardness max HRB

UNS N10629

760

350

40

226

100


We will do 100% UT test for UNS N10629 plates,sheets,coils,strips

We could supply N10629  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N10629 plates,sheets,coils,strips are widely used in Vacuum Kettle Dryer.Cistern Piler.Vacuum Strainer,Agitators.Chemical Reactor and Systems,Expansion Tank.Water Tank,Lifting Station Tank,Air Drying Plants,Condensers,Balance Valves,Needle Valves,Twin Sharft Dispersers,Chemical and petroleum process equipment and so on


In order to produce UNS N10629 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N10629 plates,UNS N10629 sheets,UNS N10629 coils,UNS N10629 strips that you need, we are glad to quote the best price

Except UNS N10629 plates,we also could produce UNS N10629 flanges,UNS N10629 bars,UNS N10629 fastener,UNS N10629 bolts,UNS N10629 fittings,UNS N10629 pipes,UNS N10629 tubes,UNS N10629 springs