Products

UNS N10242 Plates
Home > Products > Plates

We produce UNS N10242 Plates,UNS N10242 Sheets,UNS N10242 Coils, UNS N10242 Strips,N10242 Plates,N10242 Sheets,N10242 Coils, N10242 Strips,UNS N10242 cold rolled strips,UNS N10242 hot rolled strips,UNS N10242 hot rolled plates, UNS N10242 cold rolled plates from china

We could produce  UNS N10242 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N10242 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N10242 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of N10242 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N10242 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N10242 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N10242 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N10242 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N10242 combines properties which make it ideally suited for a variety of component applications in the aerospace industry


We could produce UNS N10242 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N10242  plates,sheets,coils,strips is as follows

Aluminum

0.5 max

Boron

0.006 max

Carbon

0.03 max

Chromium

7 - 9

Cobalt

2.5 max

Copper

0.5 max

Iron

2 max

Manganese

0.8 max

Molybdenum

24 - 26

Nickel

Balance

Silicon

0.8 max


The mechanical property of UNS N10242  plates,sheets,coils,strips is as follows

Test Temperature
 °F (°C)

Ultimate Tensile  Strength
 Ksi (MPa)

Yield Strength at  0.2% Offset
 Ksi (MPa)

Elongation in 4D
 %

Reduction in 4D
 %

Room

187.4 (1290)

122.4 (845)

33.7

45.7


We will do 100% UT test for UNS N10242 plates,sheets,coils,strips

We could supply N10242  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N10242 plates,sheets,coils,strips are widely used in Water Treatment Plants,Filtration Equipment Manufacturers,Pump Manufacturers,Purification Systems,Water Utility Companies,Sludge Treatment Plants,Desalination Plants,Reverse Osmosis Plants,Water Reuse Installations,Vintage Steam Engine Maintenance.Military Vehicle Producers,Automotive Component Manufacturers.Track Component Manufacturers and so on


In order to produce UNS N10242 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N10242 plates,UNS N10242 sheets,UNS N10242 coils,UNS N10242 strips that you need, we are glad to quote the best price

Except UNS N10242 plates,we also could produce UNS N10242 flanges,UNS N10242 bars,UNS N10242 fastener,UNS N10242 bolts,UNS N10242 fittings,UNS N10242 pipes,UNS N10242 tubes,UNS N10242 springs