Products

UNS N08810 Plates
Home > Products > Plates

We produce UNS N08810 Plates,UNS N08810 Sheets,UNS N08810 Coils, UNS N08810 Strips,UNS NO8810 Plates,UNS NO8810 Sheets,UNS NO8810 Coils, UNS NO8810 Strips,UNS N08810 cold rolled strips,UNS N08810 hot rolled strips,UNS N08810 hot rolled plates, UNS N08810 cold rolled plates from china

We could produce  UNS N08810 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N08810 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N08810 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO8810 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N08810 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N08810 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N08810 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N08810 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N08810  is an austenitic high-strength solid-solution Ni-Fe-Cr alloy with controlled levels of carbon, aluminium, titanium, silicon and manganese and controlled content of (Al+Ti).


We could produce UNS N08810 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N08810  plates,sheets,coils,strips is as follows

Ni

Fe

Cr

Cu

Ti

Al

C

Mn

S

Si

30.0-35.0

39.5 min

19.0-23.0

.75 max

.15-.60

.15-.60

.05-.10 max

1.5 max

.015 max

1.0 max


The mechanical property of UNS N08810  plates,sheets,coils,strips is as follows

Product

Tensile (MPA)

.2% Yield (MPA)

Elongation (%)

UNS N08810

514-685

206-411

60-30


We will do 100% UT test for UNS N08810 plates,sheets,coils,strips

We could supply UNS NO8810  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N08810 plates,sheets,coils,strips are widely used in Drilling & Boring Equipment ,Wellhead Manufacture,Repair or Servicing Companies,Pipeline Construction & Repair.Pumping & Refining Equipment,Oil Extraction Systems,Oil Rig Construction,Repair & Maintenance Subcontractors ,Upstream, Midstream or Downstream Service Providers .Isolation Valves & Choke Equipment Manufacturers,Submersible Watercraft and so on


In order to produce UNS N08810 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N08810 plates,UNS N08810 sheets,UNS N08810 coils,UNS N08810 strips that you need, we are glad to quote the best price

Except UNS N08810 plates,we also could produce UNS N08810 flanges,UNS N08810 bars,UNS N08810 fastener,UNS N08810 bolts,UNS N08810 fittings,UNS N08810 pipes,UNS N08810 tubes,UNS N08810 springs