Products

UNS N07751 Plates
Home > Products > Plates

We produce UNS N07751 Plates,UNS N07751 Sheets,UNS N07751 Coils, UNS N07751 Strips,UNS NO7751 Plates,UNS NO7751 Sheets,UNS NO7751 Coils, UNS NO7751 Strips,UNS N07751 cold rolled strips,UNS N07751 hot rolled strips,UNS N07751 hot rolled plates, UNS N07751 cold rolled plates from china

We could produce  UNS N07751 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N07751 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N07751 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO7751 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N07751 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N07751 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N07751 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N07751 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N07751 is a nickel-chromium alloy, and a modified version of Inconel X-750 alloy.


We could produce UNS N07751 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N07751  plates,sheets,coils,strips is as follows

Al

0.9 - 1.5

C

0.1 max

Cr

14 - 17

Cu

0.5 max

Fe

5 - 9

Mn

1 max

Ni

Balance

Nb+Ta

0.7 - 1.2

Si

0.5 max

S

0.01 max

Ti

2 - 2.6


The mechanical property of UNS N07751  plates,sheets,coils,strips is as follows

Properties

Metric

Tensile Strength (precipitation hardened, value at room  temperature)

186KSI

Yield strength (at strain 200%, precipitation hardened,  value at room temperature)

128KSI

Elongation at break (precipitation hardened)

25%


We will do 100% UT test for UNS N07751 plates,sheets,coils,strips

We could supply UNS NO7751  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N07751 plates,sheets,coils,strips are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on


In order to produce UNS N07751 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N07751 plates,UNS N07751 sheets,UNS N07751 coils,UNS N07751 strips that you need, we are glad to quote the best price

Except UNS N07751 plates,we also could produce UNS N07751 flanges,UNS N07751 bars,UNS N07751 fastener,UNS N07751 bolts,UNS N07751 fittings,UNS N07751 pipes,UNS N07751 tubes,UNS N07751 springs