Products

UNS N07719 Plates
Home > Products > Plates

We produce UNS N07719 Plates,UNS N07719 Sheets,UNS N07719 Coils, UNS N07719 Strips,UNS NO7719 Plates,UNS NO7719 Sheets,UNS NO7719 Coils, UNS NO7719 Strips,UNS N07719 cold rolled strips,UNS N07719 hot rolled strips,UNS N07719 hot rolled plates, UNS N07719 cold rolled plates from china

We could produce  UNS N07719 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N07719 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N07719 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO7719 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N07719 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N07719 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N07719 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N07719 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N07719 is an age-hardenable austenitic material


We could produce UNS N07719 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N07719  plates,sheets,coils,strips is as follows

Ni(+Co)....................................................................50.00-55.00

Cr..............................................................................17.00-21.00

Nb(+Ta)........................................................................4.75-5.25

Mo................................................................................2.80-3.30

Ti...................................................................................0.65-1.15

Al.................................................................................0.20-0.80

Co................................................................................1.00max.

C..................................................................................0.05max.

Mn...............................................................................0.35 max.

Si..................................................................................0.35max.

P.................................................................................0.015max.

S.................................................................................0.002max.

B.................................................................................0.006max.

Cu.................................................................................0.30max.

N...................................................................................0.01max.

Fe...................................................................................Balance†



The mechanical property of UNS N07719  plates,sheets,coils,strips is as follows

Tensile Properties (At Room Temp)

Property

Value

Tensile Strength

1114 MPA

Yield Strength at  0.2% Offset

815 MPA

Elongation in 4D

33%


We will do 100% UT test for UNS N07719 plates,sheets,coils,strips

We could supply UNS NO7719  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N07719 plates,sheets,coils,strips are widely used in mechanical engineering, in harbour cranes, ship deck cranes, truck cranes and construction cranes as well as in excavators, antenna systems, in aviation and aerospace, in the offshore technology, rail vehicles, telescopes, tunnelling machines, wind energy turbines, underwater turbines and solar energy plants and so on


In order to produce UNS N07719 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N07719 plates,UNS N07719 sheets,UNS N07719 coils,UNS N07719 strips that you need, we are glad to quote the best price

Except UNS N07719 plates,we also could produce UNS N07719 flanges,UNS N07719 bars,UNS N07719 fastener,UNS N07719 bolts,UNS N07719 fittings,UNS N07719 pipes,UNS N07719 tubes,UNS N07719 springs