Products

UNS N06617 Plates
Home > Products > Plates

We produce UNS N06617 Plates,UNS N06617 Sheets,UNS N06617 Coils, UNS N06617 Strips,UNS NO6617 Plates,UNS NO6617 Sheets,UNS NO6617 Coils, UNS NO6617 Strips,UNS N06617 cold rolled strips,UNS N06617 hot rolled strips,UNS N06617 hot rolled plates, UNS N06617 cold rolled plates from china

We could produce  UNS N06617 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N06617 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N06617 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO6617 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N06617 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N06617 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N06617 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N06617 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N06617 is a solid-solution, nickel-chromium-cobalt-molydenum alloy with an exceptional combination of high-temperature strength and oxidation resistance.


We could produce UNS N06617 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N06617  plates,sheets,coils,strips is as follows

Ni

min.

44.50

%

Cr

20.00 -

24.00

%

Co

10.00 -

15.00

%

Mo

8.00 -

10.00

%

Al

0.80 -

1.50

%

Fe

max.

3.00

%

Mn

max.

1.00

%

Si

max.

1.00

%

Ti

max.

0.60

%

Cu

max.

0.50

%

C

0.05 -

0.15

%

S

max.

0.015

%

B

max.

0.006

%

Limiting


The mechanical property of UNS N06617  plates,sheets,coils,strips is as follows

Key properties (in annealed condition)

·        Tensilestrength: 109.50–0.00 Ksi

·        Yieldstrength: 55.60–0.00 Ksi

·        Elongation: 56.00–0.00%

·        Hardness: 193.00–0.00


We will do 100% UT test for UNS N06617 plates,sheets,coils,strips

We could supply UNS NO6617  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N06617 plates,sheets,coils,strips are widely used in chemical pump,plunger pumps,Cement Mill ,sugar Mill,concrete mills and mixers,processing units,mechanical equipment, crystalizer equipment,Wellhead and Christmas tree,power transmission, turbine,gas compressor,gear boxes and so on.


In order to produce UNS N06617 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N06617 plates,UNS N06617 sheets,UNS N06617 coils,UNS N06617 strips that you need, we are glad to quote the best price

Except UNS N06617 plates,we also could produce UNS N06617 flanges,UNS N06617 bars,UNS N06617 fastener,UNS N06617 bolts,UNS N06617 fittings,UNS N06617 pipes,UNS N06617 tubes,UNS N06617 springs