Products

UNS N06333 Plates
Home > Products > Plates

We produce UNS N06333 Plates,UNS N06333 Sheets,UNS N06333 Coils, UNS N06333 Strips,UNS NO6333 Plates,UNS NO6333 Sheets,UNS NO6333 Coils, UNS NO6333 Strips,UNS N06333 cold rolled strips,UNS N06333 hot rolled strips,UNS N06333 hot rolled plates, UNS N06333 cold rolled plates from china

We could produce  UNS N06333 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N06333 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N06333 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO6333 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N06333 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N06333 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N06333 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N06333 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N06333 has an exceptional ability to withstand the repeated thermal shock of oil or water quenching.


We could produce UNS N06333 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N06333  plates,sheets,coils,strips is as follows

Chemistry

Ni

Cr

Mo

Co

W

Si

Mn

C

Fe

MIN

44.00

24.00

2.50

2.50

2.50

0.75

--

--

MAX

47.00

27.00

4.00

4.00

4.00

1.50

2.00

0.08

Balance


The mechanical property of UNS N06333  plates,sheets,coils,strips is as follows

Temp °F

Ultimate Tensile Strength, MPA

0.2% Yield Strength, MPA

Elongation %

70

738

324

48


We will do 100% UT test for UNS N06333 plates,sheets,coils,strips

We could supply UNS NO6333  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N06333 plates,sheets,coils,strips are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on


In order to produce UNS N06333 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N06333 plates,UNS N06333 sheets,UNS N06333 coils,UNS N06333 strips that you need, we are glad to quote the best price

Except UNS N06333 plates,we also could produce UNS N06333 flanges,UNS N06333 bars,UNS N06333 fastener,UNS N06333 bolts,UNS N06333 fittings,UNS N06333 pipes,UNS N06333 tubes,UNS N06333 springs