Products

UNS N06045 Plates
Home > Products > Plates

We produce UNS N06045 Plates,UNS N06045 Sheets,UNS N06045 Coils, UNS N06045 Strips,UNS NO6045 Plates,UNS NO6045 Sheets,UNS NO6045 Coils, UNS NO6045 Strips,UNS N06045 cold rolled strips,UNS N06045 hot rolled strips,UNS N06045 hot rolled plates, UNS N06045 cold rolled plates from china

We could produce  UNS N06045 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N06045 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N06045 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO6045 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N06045 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N06045 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N06045 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N06045 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N06045 is chiefly used in high-temperature applications with extremely corrosive media, such as oil ash corrosion, incineration gases, sulfur dioxide, caustic solution corrosion.


We could produce UNS N06045 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N06045  plates,sheets,coils,strips is as follows

Chemical composition

C
≤ %

Si
%

Mn
≤ %

P
≤ %

S*
≤ %

Cr
%

Mo
%

Ni
%

V
%

0,05-0,12

2,5-3,0

1,0

0,02

0,011

26,0-29,0

45,0 min.

Nb
%

Ti
%

Al
≤ %

Co
%

Cu
≤ %

N
%

Fe
%

Ce
%

Y
%

0,2

0,3

21,0-25,0

0,03-0,08


The mechanical property of UNS N06045  plates,sheets,coils,strips is as follows

Mechanical Properties
Annealed Material

Form

Tensile Min.

Yield Min. (.2% offset)

Elongation Min.

finished)

620 MPA

280 MPA

35%


We will do 100% UT test for UNS N06045 plates,sheets,coils,strips

We could supply UNS NO6045  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N06045 plates,sheets,coils,strips are widely used in gas turbines, nuclear reactors and natural gas processing plants,valves, pumps and heat exchangers,steam turbines, pressure vessels,  heat exchangers, cooling towers, pipelines and so on


In order to produce UNS N06045 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N06045 plates,UNS N06045 sheets,UNS N06045 coils,UNS N06045 strips that you need, we are glad to quote the best price

Except UNS N06045 plates,we also could produce UNS N06045 flanges,UNS N06045 bars,UNS N06045 fastener,UNS N06045 bolts,UNS N06045 fittings,UNS N06045 pipes,UNS N06045 tubes,UNS N06045 springs