Products

UNS N02205 Plates
Home > Products > Plates

We produce UNS N02205 Plates,UNS N02205 Sheets,UNS N02205 Coils, UNS N02205 Strips,UNS NO2205 Plates,UNS NO2205 Sheets,UNS NO2205 Coils, UNS NO2205 Strips,UNS N02205 cold rolled strips,UNS N02205 hot rolled strips,UNS N02205 hot rolled plates, UNS N02205 cold rolled plates from china

We could produce  UNS N02205 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N02205 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N02205 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO2205 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N02205 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N02205 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N02205 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N02205 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N02205 contains small additions of aluminum and titanium for a good combination of mechanical and electrical properties.


We could produce UNS N02205 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N02205  plates,sheets,coils,strips is as follows

Nickel, Ni

≥99

Manganese, Mn

≤0.35

Iron, Fe

≤0.20

Silicon, Si

≤0.15

Copper, Cu

≤0.15

Carbon, C

≤0.15

Magnesium, Mg

0.010 - 0.080

Titanium, Ti

0.010 - 0.050

Sulfur, S

≤0.0080


The mechanical property of UNS N02205  plates,sheets,coils,strips is as follows

Electrical Electronic Nickel Mechanical Properties

Nickel Grade

Nickel 205

Tensile Strength

ksi

65

Yield Strength

ksi

20

Elongation

% in 2 in.

40

Typical  Hardness Ann.

Rockwell HRB

--


We will do 100% UT test for UNS N02205 plates,sheets,coils,strips

We could supply UNS NO2205  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N02205 plates,sheets,coils,strips are widely used in  chemical processing, pollution control, pulp and paper production, and treatment of industrial and municipal waste,gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling and so on


In order to produce UNS N02205 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N02205 plates,UNS N02205 sheets,UNS N02205 coils,UNS N02205 strips that you need, we are glad to quote the best price

Except UNS N02205 plates,we also could produce UNS N02205 flanges,UNS N02205 bars,UNS N02205 fastener,UNS N02205 bolts,UNS N02205 fittings,UNS N02205 pipes,UNS N02205 tubes,UNS N02205 springs