Products

UNS N02200 Plates
Home > Products > Plates

We produce UNS N02200 Plates,UNS N02200 Sheets,UNS N02200 Coils, UNS N02200 Strips,UNS NO2200 Plates,UNS NO2200 Sheets,UNS NO2200 Coils, UNS NO2200 Strips,UNS N02200 cold rolled strips,UNS N02200 hot rolled strips,UNS N02200 hot rolled plates, UNS N02200 cold rolled plates from china

We could produce  UNS N02200 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of UNS N02200 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of UNS N02200 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of UNS NO2200 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce UNS N02200 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any UNS N02200 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our UNS N02200 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of UNS N02200 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

UNS N02200 is commercially pure (99.6%) wrought nickel.


We could produce UNS N02200 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of UNS N02200  plates,sheets,coils,strips is as follows

Nominal Composition in Percent:

           Ni                    99.00

           Fe                   0.40

           Si                    0.35

           Mn                   0.35

           C                     0.150

           Cu                   0.25

           S                     0.010


The mechanical property of UNS N02200  plates,sheets,coils,strips is as follows

NOMINAL  MECHANICAL PROPERTIES(ANNEALED CONDITION)

Ultimate  Tensile Strength,psi - 72,000
 0.2% Offset Yield Strength,psi - 25,000

 Elongation in 2 inches percent - 40

 Density,lb/cu.in. - .321

 Hardness, Rockwell - B61


We will do 100% UT test for UNS N02200 plates,sheets,coils,strips

We could supply UNS NO2200  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our UNS N02200 plates,sheets,coils,strips are widely used in Heavy Truck,Construction Equipment,Oil, Gas & Energy,Railway,Agriculture & Forestry,Ship Building,Cars & Light Vehicles,Defence,Aerospace Machining,Fabrications,General Engineering and so on


In order to produce UNS N02200 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of UNS N02200 plates,UNS N02200 sheets,UNS N02200 coils,UNS N02200 strips that you need, we are glad to quote the best price

Except UNS N02200 plates,we also could produce UNS N02200 flanges,UNS N02200 bars,UNS N02200 fastener,UNS N02200 bolts,UNS N02200 fittings,UNS N02200 pipes,UNS N02200 tubes,UNS N02200 springs