NICKEL 200 Plates
Home > Products > Plates

We produce NICKEL 200 Plates,NICKEL 200 Sheets,NICKEL 200 Coils, NICKEL 200 Strips,NICKEL200 Plates,NICKEL200 Sheets,NICKEL200 Coils, NICKEL200 Strips,NICKEL 200 cold rolled strips,NICKEL 200 hot rolled strips,NICKEL 200 hot rolled plates, NICKEL 200 cold rolled plates from china

We could produce  NICKEL 200 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of NICKEL 200 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of NICKEL 200 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of NICKEL200 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce NICKEL 200 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any NICKEL 200 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our NICKEL 200 plate,sheets,coils,strips can be polished on one side or two sides.

We can perform PMI testing for NICKEL 200 plate,sheets,coils,strips, or we can work with independent labs to complete PMI in order to meet customer specifications.

NICKEL 200 is commercially pure (99.6%) wrought nickel.

We could produce NICKEL 200 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of NICKEL 200  plates,sheets,coils,strips is as follows

Nominal Composition in Percent:

           Ni                    99.00

           Fe                   0.40

           Si                    0.35

           Mn                   0.35

           C                     0.150

           Cu                   0.25

           S                     0.010

The mechanical property of NICKEL 200  plates,sheets,coils,strips is as follows


Ultimate  Tensile Strength,psi - 72,000
 0.2% Offset Yield Strength,psi - 25,000

 Elongation in 2 inches percent - 40

 Density,lb/ - .321

 Hardness, Rockwell - B61

We will do 100% UT test for NICKEL 200 plates,sheets,coils,strips

We could supply NICKEL200  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our NICKEL 200 plates,sheets,coils,strips are widely used in Condensers, Rotary Vacuum Dryers,Flavor Processing ,Equipment,Slurry Tanks.Surge Tanks,Boilers & Boiler ancillary equipments.Heat Exchanger & Coils,Continuous Steam Sterilizer.Conveyor Dryer,Gass liquied Fermenters.Static Mixer.Twin Sharft Dispersers,crystalizer equipment,Wellhead and Christmas tree. power transmission, turbine,gas compressor,gear boxes and so on

In order to produce NICKEL 200 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of NICKEL 200 plates,NICKEL 200 sheets,NICKEL 200 coils,NICKEL 200 strips that you need, we are glad to quote the best price

Except NICKEL 200 plates,we also could produce NICKEL 200 flanges,NICKEL 200 bars,NICKEL 200 fasteners,NICKEL 200 bolts,NICKEL 200 pipe fittings,NICKEL 200 pipes,NICKEL 200 tubes,NICKEL 200 springs