Products

Maraging C-250 Plates
Home > Products > Plates

We produce Maraging C-250 Plates,Maraging C-250 Sheets,Maraging C-250 Coils, Maraging C-250 Strips,Maraging C250 Plates,Maraging C250 Sheets,Maraging C250 Coils, Maraging C250 Strips,Maraging C-250 cold rolled strips,Maraging C-250 hot rolled strips,Maraging C-250 hot rolled plates, Maraging C-250 cold rolled plates from china

We could produce  Maraging C-250 plate and sheets with Sizes range from 4.5MM thick to 250MM thickness, up to 3000 wide.

The thickness of Maraging C-250 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of Maraging C-250 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of Maraging C250 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce Maraging C-250 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any Maraging C-250 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Maraging C-250 plate,sheets,coils,strips can be polished on one side or two sides.

We can perform PMI testing for Maraging C-250 plate,sheets,coils,strips, or we can work with independent labs to complete PMI in order to meet customer specifications.

Maraging C-250 is an age-hardenable iron-nickel steel.

We could produce Maraging C-250 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of Maraging C-250  plates,sheets,coils,strips is as follows

Chemical Analysis

C

.03 max

MN

.10 max

P

.01 max

S

.01 max

Si

.10 max

Cr

Ni

18.50

Mo

4.80

Cu

Co

7.50

Cb

Ti

.40

Al

.10

Fe

B

.004

Zr

.01


The mechanical property of Maraging C-250  plates,sheets,coils,strips is as follows

Material

Condition

Ultimate Tensile (min)

Yield Strength (Min)

Elongation in 4D %  (min)

Hardness

Mpa

Ksi

Mpa

Ksi

Maraging C250

After Maraging heat  treatment 900°F

1758

255

1724

250

6

≥ 48 HRC


We will do 100% UT test for Maraging C-250 plates,sheets,coils,strips

We could supply Maraging C250  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our Maraging C-250 plates,sheets,coils,strips are widely used in chemical processing, pollution control, pulp and paper production, and treatment of industrial and municipal waste,gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling. and so on.

In order to produce Maraging C-250 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of Maraging C-250 plates,Maraging C-250 sheets,Maraging C-250 coils,Maraging C-250 strips that you need, we are glad to quote the best price

Except Maraging C-250 plates,we also could produce Maraging C-250 flanges,Maraging C-250 bars,Maraging C-250 fastener,Maraging C-250 bolts,Maraging C-250 pipe fittings,Maraging C-250 pipes,Maraging C-250 tubes,Maraging C-250 springs