Products

Inconel Alloy 718SPF Plates
Home > Products > Plates

We produce Inconel Alloy 718SPF Plates,Inconel Alloy 718SPF Sheets,Inconel Alloy 718SPF Coils, Inconel Alloy 718SPF Strips,Inconel 718SPF Plates,Inconel 718SPF Sheets,Inconel 718SPF Coils, Inconel 718SPF Strips,Inconel Alloy 718SPF cold rolled strips,Inconel Alloy 718SPF hot rolled strips,Inconel Alloy 718SPF hot rolled plates, Inconel Alloy 718SPF cold rolled plates from china

We could produce  Inconel Alloy 718SPF plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of Inconel Alloy 718SPF strips and coil that we could do range from 0.05MM to 3MM

The surface finish of Inconel Alloy 718SPF strips and coils that we could do is as follows:2B / 2D / BA

The hardness of Inconel 718SPF strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce Inconel Alloy 718SPF plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any Inconel Alloy 718SPF plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Inconel Alloy 718SPF plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of Inconel Alloy 718SPF plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

Inconel Alloy 718SPF is an age-hardenable austenitic material


We could produce Inconel Alloy 718SPF plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of Inconel Alloy 718SPF  plates,sheets,coils,strips is as follows

Ni(+Co)....................................................................50.00-55.00

Cr..............................................................................17.00-21.00

Nb(+Ta)........................................................................4.75-5.25

Mo................................................................................2.80-3.30

Ti...................................................................................0.65-1.15

Al.................................................................................0.20-0.80

Co................................................................................1.00max.

C..................................................................................0.05max.

Mn...............................................................................0.35 max.

Si..................................................................................0.35max.

P.................................................................................0.015max.

S.................................................................................0.002max.

B.................................................................................0.006max.

Cu.................................................................................0.30max.

N...................................................................................0.01max.

Fe...................................................................................Balance†


The mechanical property of Inconel Alloy 718SPF  plates,sheets,coils,strips is as follows

Tensile Properties (At Room Temp)

Property

Value

Tensile Strength

1114 MPA

Yield Strength at  0.2% Offset

815 MPA

Elongation in 4D

33%


We will do 100% UT test for Inconel Alloy 718SPF plates,sheets,coils,strips

We could supply Inconel 718SPF  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our Inconel Alloy 718SPF plates,sheets,coils,strips are widely used in equipment for the manufacture of synthetic rubber, plastics, organic and heavy chemicals, pharmaceuticals, solvents and explosives, petroleum products, etc. Also employed in heat exchangers, mixing tanks, metal cleaning and pickling equipment and process piping and so on


In order to produce Inconel Alloy 718SPF plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of Inconel Alloy 718SPF plates,Inconel Alloy 718SPF sheets,Inconel Alloy 718SPF coils,Inconel Alloy 718SPF strips that you need, we are glad to quote the best price

Except Inconel Alloy 718SPF plates,we also could produce Inconel Alloy 718SPF flanges,Inconel Alloy 718SPF bars,Inconel Alloy 718SPF fastener,Inconel Alloy 718SPF bolts,Inconel Alloy 718SPF fittings,Inconel Alloy 718SPF pipes,Inconel Alloy 718SPF tubes,Inconel Alloy 718SPF springs