Products

Inconel 783 Plates
Home > Products > Plates

We produce Inconel 783 Plates,Inconel 783 Sheets,Inconel 783 Coils, Inconel 783 Strips,Inconel783 Plates,Inconel783 Sheets,Inconel783 Coils, Inconel783 Strips,Inconel 783 cold rolled strips,Inconel 783 hot rolled strips,Inconel 783 hot rolled plates, Inconel 783 cold rolled plates from china

We could produce  Inconel 783 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of Inconel 783 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of Inconel 783 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of Inconel783 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce Inconel 783 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any Inconel 783 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Inconel 783 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of Inconel 783 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

Inconel 783 are also known as high performance alloys specially designed to cater to environments with very high temperature of above 540°C (1000°F) where deformation resistance and high surface stability are essential.

We could produce Inconel 783 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of Inconel 783  plates,sheets,coils,strips is as follows

Table 1 - Limiting Chemical Composition*, %

Cr......................................................................2.5-3.5

Ni.........................................................................26.0-30.0

Fe..............................................................................24.0-27.0

Nb..........................................................................2.5-3.5

Al........................................................................5.0-6.0

Co........................................................................Remainder

B.......................................................................0.003-0.012

C........................................................................0.03max.

Mn.................................................................0.50 max.

Si.........................................................................0.50max.

P..............................................................0.015max.

S.........................................................................0.005max

Ti..........................................................................0.1-0.4

Cu........................................................................0.50max


The mechanical property of Inconel 783  plates,sheets,coils,strips is as follows

Properties

Metric

Imperial

Tensile  strength

1194 MPa

171 ksi

Yield  strength

779 MPa

113 ksi

Poisson’s  ratio

0.31

0.31

Elastic  modulus

177.3 GPA

25.72 ksi

Elongation  at break

24%

24%


We will do 100% UT test for Inconel 783 plates,sheets,coils,strips

We could supply Inconel783  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our Inconel 783 plates,sheets,coils,strips are widely used in Continuous Steam Sterilizer,Chamber Dryer.Size Cooker.Hydro Extractor,Petroleum Refining  fluid catalytic cracking units,high-pressure (microbial) deep-sea sampler and incubation chambers,Mixing tanks,CNG Storage.LNG Cryogenics,Scrubbers and so on


In order to produce Inconel 783 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of Inconel 783 plates,Inconel 783 sheets,Inconel 783 coils,Inconel 783 strips that you need, we are glad to quote the best price

Except Inconel 783 plates,we also could produce Inconel 783 flanges,Inconel 783 bars,Inconel 783 fastener,Inconel 783 bolts,Inconel 783 fittings,Inconel 783 pipes,Inconel 783 tubes,Inconel 783 springs