Products

Inconel 722 Plates
Home > Products > Plates

We produce Inconel 722 Plates,Inconel 722 Sheets,Inconel 722 Coils, Inconel 722 Strips,Inconel722 Plates,Inconel722 Sheets,Inconel722 Coils, Inconel722 Strips,Inconel 722 cold rolled strips,Inconel 722 hot rolled strips,Inconel 722 hot rolled plates, Inconel 722 cold rolled plates from china

We could produce  Inconel 722 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of Inconel 722 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of Inconel 722 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of Inconel722 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce Inconel 722 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any Inconel 722 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Inconel 722 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of Inconel 722 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

Inconel 722 is a nickel-chromium alloy strengthened by the addition titanium and aluminum.

We could produce Inconel 722 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of Inconel 722  plates,sheets,coils,strips is as follows

Element

Content (%)

C

0.08 max

Si

0.07 max

S

0.01 max

Cr

14 - 17

Fe

5 - 9

Ti

2 - 2.75

Mn

1 max

Cu

0.5 max

Al

0.4 - 1

Ni

Remainder


The mechanical property of Inconel 722  plates,sheets,coils,strips is as follows

Tensile Strength

ksi

MPa

145 min

1000 min



Yield Strength

ksi

MPa

95 min

655 min



Hardness

23 HRC max



Elongation

15% min


We will do 100% UT test for Inconel 722 plates,sheets,coils,strips

We could supply Inconel722  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our Inconel 722 plates,sheets,coils,strips are widely used in heat exchangers,air receivers,pressure vessels,Stripper columns, separators, splitter, columns, hydro treaters, hydro crackers, desalters,shipping building and Aviation,drilling stations, pipelines and refineries,processing units,mechanical equipment, crystalizer equipment,Offshore and onshore industry, such as subsea and deepwater offshore oil production systems, industrial air compressors, power generators and nitrogen generators and so on,


In order to produce Inconel 722 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of Inconel 722 plates,Inconel 722 sheets,Inconel 722 coils,Inconel 722 strips that you need, we are glad to quote the best price

Except Inconel 722 plates,we also could produce Inconel 722 flanges,Inconel 722 bars,Inconel 722 fastener,Inconel 722 bolts,Inconel 722 fittings,Inconel 722 pipes,Inconel 722 tubes,Inconel 722 springs