We produce Incoloy 903 Plates,Incoloy 903 Sheets,Incoloy 903 Coils, Incoloy 903 Strips,Incoloy903 Plates,Incoloy903 Sheets,Incoloy903 Coils, Incoloy903 Strips,Incoloy 903 cold rolled strips,Incoloy 903 hot rolled strips,Incoloy 903 hot rolled plates, Incoloy 903 cold rolled plates from china
We could produce Incoloy 903 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.
The thickness of Incoloy 903 strips and coil that we could do range from 0.05MM to 3MM
The surface finish of Incoloy 903 strips and coils that we could do is as follows:2B / 2D / BA
The hardness of Incoloy903 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft
Customers can select a number of processing options to produce Incoloy 903 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut
We can polish nearly any Incoloy 903 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Incoloy 903 plate,sheets,coils,strips can be polished on one side or two sides.
In order to control the quality of Incoloy 903 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling
Incoloy 903 combines high strength with a low and constant coefficient of thermal expansion at temperatures to about 800°F (430°C)
We could produce Incoloy 903 plates,sheets,coils,strips as per the standard of ASTM B463
The chemical composition of Incoloy 903 plates,sheets,coils,strips is as follows
Table 1 - Limiting Composition, wt %
Ni..........................................................................36.0-40.0
Co..........................................................................13.0-17.0
Al ....................................................................0.30-1.15
Ti.......................................................................1.00-1.85
Nb.......................................................................2.40-3.50
Fe...............................................................................Balance*
The mechanical property of Incoloy 903 plates,sheets,coils,strips is as follows
Properties | Metric | Imperial |
Tensile strength (precipitation hardened) | 1310 MPa | 190000 psi |
Yield strength (@ strain 0.200 %, precipitation hardened) | 1100 MPa | 160000 psi |
Elastic modulus (@ 0°C/32°F) | 146.8 GPa | 21290 ksi |
Poisson's ratio (@ 250°C/482°F) | 0.226 | 0.226 |
Elongation at break (precipitation hardened) | 14% | 14% |
We will do 100% UT test for Incoloy 903 plates,sheets,coils,strips
We could supply Incoloy903 plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)
Our Incoloy 903 plates,sheets,coils,strips are widely used in Butterfly Valves,Globe Valves,compressed air stream,Agitated Neutsche Filter,Scrubber vessels.Accumulators,Shell and Tube Heat Exchangers,Storage tanks and Handling Equipments,Bulk Liquefied Petroleum Gas (LPG), Propane & Ammonia Storage and Handling Systems,Dry Dock & Ship Yard Maintenance and so on
In order to produce Incoloy 903 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears
Please tell us the size of Incoloy 903 plates,Incoloy 903 sheets,Incoloy 903 coils,Incoloy 903 strips that you need, we are glad to quote the best price
Except Incoloy 903 plates,we also could produce Incoloy 903 flanges,Incoloy 903 bars,Incoloy 903 fastener,Incoloy 903 bolts,Incoloy 903 fittings,Incoloy 903 pipes,Incoloy 903 tubes,Incoloy 903 springs
-
New
·1.4898 Plates ·1.4886 Plates ·1.4529 Plates ·1.4876 Plates ·2.4856 Plates ·2.4851 Plates ·2.4816 Plates ·2.4668 Plates ·2.4663 Plates ·2.4642 Plates -
Any
·UNS R30556 Plates ·UNS N04404 Plates ·Monel 400 Plates ·Nitronic 40 Plates ·316L Plates ·2.4606 Plates ·UNS S31277 Plates ·UNS N07719 Plates ·Hastelloy G-50 Plates ·UNS S31700 Plates -
Hot
·Inconel 600 Plates ·Inconel 601 Plates ·Inconel 617 Plates ·Inconel 625 Plates ·Inconel 686 Plates ·Inconel 690 Plates ·Inconel 693 Plates ·Inconel 718 Plates ·Inconel 725 Plates ·Inconel X-750 Plates