Products

Custom 455 Plates
Home > Products > Plates

We produce Custom 455 Plates,Custom 455 Sheets,Custom 455 Coils, Custom 455 Strips,Custom455 Plates,Custom455 Sheets,Custom455 Coils, Custom455 Strips,Custom 455 cold rolled strips,Custom 455 hot rolled strips,Custom 455 hot rolled plates, Custom 455 cold rolled plates from china

We could produce  Custom 455 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of Custom 455 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of Custom 455 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of Custom455 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce Custom 455 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any Custom 455 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our Custom 455 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of Custom 455 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

Custom 455 is a martensitic stainless that combines corrosion resistance similar to 304, easy fabrication and one step age hardenability yielding strength characteristics similar to martensitic stainless'.


We could produce Custom 455 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of Custom 455  plates,sheets,coils,strips is as follows

Chemical Composition Limits

Weight%

Carbon

Phosphorous

Silcon

Nickel

Copper

Cb + Ta

Mn

Sulfur

Chroinium

Mo

Ti

Fe

Custom 455

0.05 max

0.040  max

0.50 max

7.5-9.5

1.5-2.5

0.10-0.50

0.50 max

0.030  max

11.0-12.5

0.50 max

0.80-1.4

Bal


The mechanical property of Custom 455  plates,sheets,coils,strips is as follows

Material

Condition

0.2 % Yield Strength (Mpa)

Ultimate Tensile Strength (Mpa)

Notch Tensile Strength

% Elongation in 4D

% Reduction of Area

Rockwell C Hardness

Charpy V Notch Impact Strength (ft-lbs)

Custom  455

A

793

1000

1585

14

60

31

70

Custom  455

H900

1689

1724

1792

10

45

49

9

Custom  455

H950

1551

1620

2068

12

50

48

14

Custom  455

H1000

1379

1448

2000

14

55

45

20

Custom  455

H1050

1207

1310

1793

15

55

40

35


We will do 100% UT test for Custom 455 plates,sheets,coils,strips

We could supply Custom455  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our Custom 455 plates,sheets,coils,strips are widely used in Feed-water and steam generator tubing in power plants,Brine heaters and evaporator bodies in salt plants,Sulphuric and hydrouoric acid alkylation plants,Industrial heat exchangers,Cladding for crude oil distillation columns,Splash-zone sheathing in offshore structures, seawater service,Plants for isotope separation in the production of nuclear fuel pumps and valves used in the manufacture of chlorinated hydrocarbons and so on


In order to produce Custom 455 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of Custom 455 plates,Custom 455 sheets,Custom 455 coils,Custom 455 strips that you need, we are glad to quote the best price

Except Custom 455 plates,we also could produce Custom 455 flanges,Custom 455 bars,Custom 455 fastener,Custom 455 bolts,Custom 455 fittings,Custom 455 pipes,Custom 455 tubes,Custom 455 springs