Products

AerMet 100 Plates
Home > Products > Plates

We produce AerMet 100 Plates,AerMet 100 Sheets,AerMet 100 Coils, AerMet 100 Strips,AerMet100 Plates,AerMet100 Sheets,AerMet100 Coils, AerMet100 Strips,AerMet 100 cold rolled strips,AerMet 100 hot rolled strips,AerMet 100 hot rolled plates, AerMet 100 cold rolled plates from china

We could produce  AerMet 100 plate and sheets with Sizes range from 4.5MM thick to 200MM thickness, up to 3000 wide.

The thickness of AerMet 100 strips and coil that we could do range from 0.05MM to 3MM

The surface finish of AerMet 100 strips and coils that we could do is as follows:2B / 2D / BA

The hardness of AerMet100 strip and coils that we could do is as follows:1/4 Hard, 1/2 Hard, 3/4 Hard, Full Hard, Spring Hard, Annealed, Pickled Soft

Customers can select a number of processing options to produce AerMet 100 plate to their exact specifications, reducing materiel costs, production time, scrap and internal handling. All stainless steel grades of plate can be cut

We can polish nearly any AerMet 100 plates,sheets,coils,strips to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Our AerMet 100 plate,sheets,coils,strips can be polished on one side or two sides.

In order to control the quality of AerMet 100 plate,sheets,coils,strips,Test pieces are cut from each plate,sheets,coils,strips and sent to our Metallurgical Laboratory, where, aided by a computerized Certificate of Test system, experts determine if the plate,sheets,coils,strips meet all requirements for shipment. Each plate,sheets,coils,strips is analyzed on an optical emission spectrometer to verify chemical content. The microstructure of the plate,sheets,coils,strips is examined for strength, ductility, and corrosion resistance. All additional scrap is separated by grade and returned to a melt shop for recycling

AerMet 100 has a high hardness and strength combined with very good toughness and ductility


We could produce AerMet 100 plates,sheets,coils,strips as per the standard of ASTM B463

The chemical composition of AerMet 100  plates,sheets,coils,strips is as follows

Element

min

max

Carbon

0.21

0.25

Manganese

0.10

Silicon

0.10

Phosphorus

0.008

Sulfur

0.005

Phosphorus + Sulfur

0.010

Chromium

2.90

3.30

Nickel

11.00

12.00

Cobalt

13.00

14.00

Molybdenum

1.10

1.30

Titanium

0.015

Aluminum

0.015

Oxygen

0.0020 (20 ppm)

Nitrogen

0.0015 (15 ppm)


The mechanical property of AerMet 100  plates,sheets,coils,strips is as follows

Typical Mechanical Properties    after heat treatment


0.2% proof Stress

Tensile Strength

Elongation

Reduction of area

MPA

MPA

%

%

Min

Min

Min

Min

Longitudinal

1620

1931

10

55

Transverse

1620

1931

8

45



We will do 100% UT test for AerMet 100 plates,sheets,coils,strips

We could supply AerMet100  plate,sheets,coils,strips material certificate as pe EN10204-3.1 or EN10204-3.2 by third party(like TUV,DNV,GL,and so on)

Our AerMet 100 plates,sheets,coils,strips are widely used in chemical processing, pollution control, pulp and paper production, and treatment of industrial and municipal waste,gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling and so on


In order to produce AerMet 100 plates,sheets,coils,strips, we are equipped with state-of-the-art equipments,which include 20 High Sendzimir Mills,degreasing cleaning lines,continuous bright annealing furnaces,Skin pass mills,a Tension Levelers , Slitters and fly shears

Please tell us the size of AerMet 100 plates,AerMet 100 sheets,AerMet 100 coils,AerMet 100 strips that you need, we are glad to quote the best price

Except AerMet 100 plates,we also could produce AerMet 100 flanges,AerMet 100 bars,AerMet 100 fastener,AerMet 100 bolts,AerMet 100 fittings,AerMet 100 pipes,AerMet 100 tubes,AerMet 100 springs